PMEG4005CEAX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMEG4005CEAX is a single Schottky rectifier silicon chip which is produced by NXP Semiconductors and it is a cost-effective solution for high-efficiency power supplies. As part of the portfolio of General Purpose Rectifiers, the device belongs to the Diode - Rectifiers - Single family.

The single-phase silicon Schottky rectifier’s application field is well diversified, varying from high efficiency power supplies to automotive applications such as ignition systems and Electric Vehicle (EV) charging stations; general purpose rectification is common as well.

The PMEG4005CEAX is a Schottky rectifier with a maximum total forward current rating of 400mA and a peak rectified forward current rating of 5A. It has a much lower forward voltage drop than a traditional silicon-based diode, which contributes to its ability to dissipate heat more effectively.

The diode is designed with an internal melting construction, which limits the forward current of the device to that level which would cause the junction temperature to reach the specified melting temperature. As a result, the chip will self-regulate, dissipating the heat away from the pin and not allowing the junction temperature to exceed it’s maximum ratings.

It is important to note that the PMEG4005CEAX works best within its rated power dissipation range and that it should not be operated at a higher current and/or ambient temperature than the rated values. Otherwise, as the device tries to remain within its power dissipation specification, its forward voltage drop, current, and temperature will increase, further compromising its thermal performance.

The Schottky nature of the chip adds another layer of efficiency and space-saving potential to the application, as the parasitic capacitance due to the junction is much lower than in Si-based diodes and its entire footprint is much smaller.

The PMEG4005CEAX does not require a complex circuit topology from the user as it comes ready to use in a SOD123F-3 package composed of a steel cap over an oxide layer and device lead frame.

The PMEG4005CEAX Schottky rectifier is a single-phase unidirectional device in which a single junction rectifies the AC input to provide a DC output and it thus works on the basic principle of rectification. The diode is specially designed to rectify the current by allowing current to flow in one direction, blocking it when in the other direction.

The circuit works on the principle of a depending on the voltage across the terminals of the diode and the current it produces, a reverse current will begin to form and the rectifying element will begin to conduct when the applied voltage reaches the peak of the applied voltage waveform.

When the forward voltage applied to the diode is greater than the threshold voltage, the diode then enters its forward biased operating mode, allowing a single-phase rectified output. This results in a current which flows in only one direction, and thus a single-phase rectified output is produced. The average value of the output current is obtained by computing the rectified input current and assuming a constant power dissipation over the full range.

In conclusion, This single Schottky rectifier is part of the Diode - Rectifiers - Single family and its applications include high-efficiency power supplies, automotive applications such as ignition systems, Electric Vehicle (EV) charging stations, and general purpose rectification. It works by rectifying current by allowing current to flow in one direction, blocking it when in the other direction, and has a much lower threshold voltage than a typical Si-based diode. It is a cost-effective solution which should be kept within its rated power dissipation range and not used at a higher current or ambient temperature than its value.

The specific data is subject to PDF, and the above content is for reference