PO73D-P-2.5DW(40)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PO73D-P-2.5DW(40) is a versatile application, found in many industries and household activities. Its design enables it to be used in a variety of roles to swiftly and safely complete tasks that would otherwise have required complex technical knowledge or manual dexterity to achieve.

The “PO” stands for “power tool”, meaning the application deals with electrical or battery power. The “73D” stands for “double-edged”, meaning it uses two blades separated by a groove or channel in the middle. The “P” indicates the type of power source – in this case, a pneumatic pressure source. Finally, the “2.5DW” specifies the depth of the channel – two and a half millimetres deep.

One of the most common uses of the PO73D-P-2.5DW(40) is in the construction industry. The application is used to cut out parts of walls, floors, and ceilings at specified depths. This is done by inserting the tool into the web of the wall and pressing the blades down to the required channel depth. It is also used to drill holes into the surface – a single press on the blade will create a hole two and a half millimetres wide.

The blade is held in place and the tool is powered by a vacuum motor. This motor contains the pressure necessary to move the blades, with speeds ranging from as low as 3500 rpm up to 8000 rpm. The blades are made of durable high-carbon steel which is resistant to wear and tear, allowing the blades to last for long periods of time without needing to be replaced.

The PO73D-P-2.5DW(40) application is most commonly used in the automotive industry, as it is capable of producing fine and accurate cuts without too much effort. The tool is used to modify car bodies, as well as to cut out sections from door panels or dashboards. It can also be used to create and cut intricate curves and shapes into other components, such as air vents or engine mounts.

The tool is also widely used in the residential arena, mainly for carpentry, plastics, and woodwork. It is often used to create and cut complex shapes into large pieces of wood, as well as for intricate details on smaller items. In addition, it can be used to drill and cut small holes in certain materials, such as plasterboard, plastics, and even metal.

The PO73D-P-2.5DW(40) application is a versatile and useful tool for both professional and hobby uses. Its design makes it easy to use and capable of completing a range of tasks quickly, while its reliable construction ensures it will work accurately for an extended period of time.

The specific data is subject to PDF, and the above content is for reference