Allicdata Part #: | 993-1371-ND |
Manufacturer Part#: |
POE29U-560 |
Price: | $ 21.22 |
Product Category: | Power Supplies - External/Internal (Off-Board) |
Manufacturer: | Phihong USA |
Short Description: | POE INJECTOR DESKTOP 56V |
More Detail: | 56V Power Over Ethernet (POE) 1 Port Passive Injec... |
DataSheet: | POE29U-560 Datasheet/PDF |
Quantity: | 9 |
1 +: | $ 19.29060 |
10 +: | $ 17.74710 |
25 +: | $ 16.27920 |
100 +: | $ 14.93730 |
250 +: | $ 14.06480 |
Series: | -- |
Part Status: | Active |
Type: | Passive Injector |
Voltage - Input: | 90 ~ 264 VAC |
Number of Ports: | 1 |
Voltage - Output: | 56V |
Current - Output: | 540mA |
Power (Watts) - Per Port: | 30W |
Compliance: | IEEE802.3af |
Data Rate: | 10/100/1000 Mbps |
Features: | OCP, OVP, SCP |
Operating Temperature: | -20°C ~ 50°C |
Efficiency: | Level VI |
Mounting Type: | Desktop |
Size / Dimension: | 5.51" L x 2.55" W x 1.42" H (140.0mm x 65.0mm x 36.0mm) |
Note: | -- |
Input Connector: | IEC 320-C14 |
Output Connector: | RJ45 (Data, Power) |
Approvals: | CE, cULus |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power over Ethernet (PoE) is a technology that allows power to be sent to a device using the same twisted pair cables used for data transmission. This eliminates the need for an external power source, which in turn reduces costs, complexity, and the number of cables that must be installed. The most common application for PoE is powering network switches and access points in a network. The POE29U-560 is an Ethernet PoE Injector allowing a network switch or access point to be powered with up to 29 Watts of power.
The POE29U-560 is based on IEEE 802.3at standard, also known as PoE+. This standard allows up to 30 Watts of power over a single twisted pair cable, which is significantly more than the original IEEE 802.3af standard which only allowed up to 15 Watts. The POE29U-560 takes power from a standard 110-240V AC outlet and converts it to the required voltage level for PoE delivery (48V DC).
The POE29U-560 can be used in a variety of Ethernet PoE applications such as powering VoIP phones, Wi-Fi access points, IP cameras, and even LED lighting. It is designed for use with low voltage (24V DC) applications such as LED lighting that use slightly less than the maximum power of 29 Watts allowed by the PoE+ standard.
The POE29U-560 is designed for reliable operation in rugged industrial environments. It is robust enough to last in harsh conditions, such as extreme temperatures, humidity, dust, and vibration. It is also rated for IP-30 protection, meaning it is resistant to dust and debris, and partially resistant to water splash, making it suitable for outdoor installations.
The POE29U-560 has a double protection system to ensure reliable operation. It has an over-voltage/over-current/short-circuit protection device, which is built into the circuit to protect both the PoE device and the injector from damage due to excessive current or voltage. It also has an over-temperature protection device to ensure that the injector automatically shuts off when the device reaches a certain temperature.
The POE29U-560 is easy to install and configure. Connecting the injector simply requires plugging the network cable into the RJ45 port on the injector and the RJ45 port on the device. After connecting the power cord to the power source, it automatically sends power to the device through the Ethernet cable. Configuring the injector is not required, but it can be done through the use of the configuration switch. This switch can be used to adjust the output voltage, from 0V to 48V DC, and the output current, from 0A to 3A.
The POE29U-560 is a reliable and cost-effective solution for powering Ethernet PoE devices. It is designed to deliver up to 29 Watts of power over a single pair of twisted pair cables, and provides reliable operation in rugged industrial environments. It is easy to install and configure, and offers over-voltage/over-current/short-circuit and over-temperature protections to ensure safe and reliable operation.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
POE26W3.3VS10-R | Eaton | 3.46 $ | 1000 | TRANSFRMR 160UH 26W 2.6A ... |
POE26W5V-R | Eaton | 3.46 $ | 1000 | TRANSFRMR 160UH 26W 2.6A ... |
POE26W3.3VS5-R | Eaton | 3.69 $ | 1000 | TRANSFRMR 160UH 26W 2.6A ... |
POE21-240 | Phihong USA | 24.26 $ | 203 | POE SPLITTER 21W 24V DESK... |
POE20D-1AF | Phihong USA | 32.35 $ | 362 | POE INJECTOR 19.6W 56V DE... |
POE240U-4UP-N | Phihong USA | 275.35 $ | 30 | POE INJECTOR 60W 56V DESK... |
POE29U-560 | Phihong USA | 21.22 $ | 9 | POE INJECTOR DESKTOP 56V5... |
POE29W-560 | Phihong USA | 21.22 $ | 53 | POE INJECTOR DESKTOP 56V5... |
POE21-120H | Phihong USA | 28.32 $ | 83 | POE SPLITTER 12W 12V DESK... |
POE21U-1AF | Phihong USA | 19.4 $ | 1000 | POE INJECTOR 19.6W 56V DE... |
POE21-120 | Phihong USA | 24.26 $ | 1000 | POE SPLITTER 21W 12V DESK... |
POE21W-1AF | Phihong USA | 11.6 $ | 1000 | POE INJECTOR 19.6W 56V DE... |
POE20U-560(G) | Phihong USA | 15.38 $ | 1000 | POE INJECTOR 19.6W 56V DE... |
POE29U-1AF | Phihong USA | 15.6 $ | 1000 | POE INJECTOR DESKTOP C14 ... |
POE21-120F | Phihong USA | 28.32 $ | 1000 | POE SPLITTER 21W 12V DESK... |
POE240U-2MP-N | Phihong USA | 311.7 $ | 1000 | POE INJECTOR 95W DESKTOPP... |
POE INJECTOR 30W 55V DESKTOP55V Power Ov...
POE PSE MODULE3.3V Power Over Ethernet (...
POE PSE MODULE3.3V Power Over Ethernet (...
POE PSE MODULE3.3V Power Over Ethernet (...
POE PSE MODULE3.3V Power Over Ethernet (...
GHOSTBRIDGE 100-240VAC TO 24VDC24V Power...