PPT2-0010DKK2VS

Series:	PPT2
Part Status:	Active
Pressure Type:	Differential
Operating Pressure:	±10 PSI (±68.95 kPa)
Output Type:	Analog, RS-232
Output:	0 V ~ 5 V
Accuracy:	±0.0375%
Voltage - Supply:	6 V ~ 34 V
Port Size:	Male - 1/8" (3.18mm) Swagelok™, Filter
Port Style:	Threaded
Features:	--
Termination Style:	Connector
Maximum Pressure:	±30 PSI (±206.84 kPa)
Operating Temperature:	-40°C ~ 85°C
Package / Case:	Module Cube
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers

Pressure sensors and transducers are used to measure the pressure of liquid or gas within a system. They are commonly used in industrial processes, medical equipment, and other electronic systems where measuring pressure is essential.The pressure sensor is the most common type of pressure transducer. It uses an electrical current to measure pressure and converts it into a readable signal. The voltage or current produced by the sensor is dependent on the pressure applied. The PPT2-0010DKK2VS is a pressure sensor which uses an electronic sensing element to measure pressure. It utilizes a Wheatstone bridge configuration to convert the measured pressure into an electrical signal. The Wheatstone bridge configuration consists of four resistors connected in series to form a bridge. When a pressure is applied to the device it will change the resistance of the resistors resulting in a voltage or current output.The PPT2-0010DKK2VS is designed to operate within a certain range of pressures, usually between 0 and 10 bar. It is commonly used in environments where the pressure is varying, such as in agricultural, automotive, oil and gas, and aerospace applications. This device is not designed for use in hazardous environments or for measuring absolute pressure.The pressure sensor is made up of a sensing element and a housing. The sensing element is typically made of a dielectric material such as plastic, ceramic, or composite material. It is used to measure the pressure of the system. The housing is made of stainless steel and serves as a protective cover for the sensing element, allowing the device to operate in harsh conditions. The PPT2-0010DKK2VS is a low cost pressure sensor, making it ideal for many applications. It is reliable and easy to install, making it an ideal choice for those who need a reliable and economical pressure measurement solution.The working principle of the PPT2-0010DKK2VS is simple. When a pressure is applied to the sensor, the resistance of the Wheatstone bridge will change and a voltage or current output will be produced. The output of the sensor can then be used to measure the pressure of the system.The PPT2-0010DKK2VS pressure sensor is a reliable and economical solution for measuring pressures in various applications. It is easy to install and use, making it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description