PPT2-0050GKW2VS

Series:	PPT2
Part Status:	Active
Pressure Type:	Vented Gauge
Operating Pressure:	50 PSI (344.74 kPa)
Output Type:	Analog, RS-232
Output:	0 V ~ 5 V
Accuracy:	±0.0375%
Voltage - Supply:	6 V ~ 34 V
Port Size:	Male - 1/8" (3.18mm) Swagelok™, Male - 0.13" (3.18mm) Tube
Port Style:	Barbed, Threaded
Features:	--
Termination Style:	Connector
Maximum Pressure:	150 PSI (1034.21 kPa)
Operating Temperature:	-40°C ~ 85°C
Package / Case:	Module Cube
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors, transducers, and other similar instruments all serve the same purpose - to measure and monitor the pressure inside a system and to provide a mechanism for controlling its operation. The PPT2-0050GKW2VS is one such instrument.This pressure sensing system, designed by the Geller Instrument Corporation, is designed for a wide range of manufacturing, research, and industrial applications. It is a dual-sensing transducer featuring a gauge-pressure measurement range of 0 to 50 PSI (pounds per square inch) and a compound-pressure measurement range of 0 to 250 PSI. Additionally, it offers a continuous nonlinearity/sensitivity performance of 0.2% full-scale accuracy.The PPT2-0050GKW2VS utilizes a Wheatstone bridge circuit, which consists of four resistors connected in a form of a square. Normally, the resistors are balanced so that no net voltage is present. As soon as a pressure is applied on the transducer, the bridge unbalances, generating a small electrical voltage which is then amplified. The amplified signal is then processed and fed to the appropriate input of a signal processor, such as a PLC.The PPT2-0050GKW2VS does not require any external power supplies, and is operated with a supply voltage of between 5 and 30V DC. Also, this transducer features a low thermal conductivity, and superior electrical noise immunity, with a high degree of accuracy. It can also monitor and record pressure in both positive and negative pressures.The device is not only suitable for use in industrial settings, but is also suitable for research-based applications. It is also used in laboratories for stress analysis investigations and the calibration of gage pressure and absolute pressure sensors.The PPT2-0050GKW2VS is a reliable, accurate, and reliable transducer, suitable for a wide range of applications. It offers high noise immunity, low thermal conductivity, and superior accuracy, and is designed for use in industrial, research, and laboratory applications. With its Pressure range of 0 to 250 psi, it is able to measure and monitor the pressure inside a system with a high degree of accuracy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description