PPT2-0300AGN2VS

Series:	PPT2
Part Status:	Active
Pressure Type:	Absolute
Operating Pressure:	300 PSI (2068.43 kPa)
Output Type:	Analog, RS-232
Output:	0 V ~ 5 V
Accuracy:	±0.0375%
Voltage - Supply:	6 V ~ 34 V
Port Size:	Female - 1/8" (3.18mm) Swagelok™
Port Style:	Threaded
Features:	--
Termination Style:	Connector
Maximum Pressure:	600 PSI (4136.85 kPa)
Operating Temperature:	-40°C ~ 85°C
Package / Case:	Module Cube
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers

The PPT2-0300AGN2VS is an industrial pressure transducer that can measure and evaluate sustained or point pressure. This sensor uses a Wheatstone bridge to provide a resistive-based output that can then be read by an external unit, such as a computer. The transducer measures and monitors the pressure in a wide range of applications including pressure control, safety control, level control, force testing, and stress analysis.The PPT2-0300AGN2VS pressure transducer has a housing made from 316 stainless steel, and a diaphragm made from 304 stainless steel. The wetted parts are corrosion-resistant and ideal for any corrosive environment. It can be used to measure absolute, sealed (also known as “gage”), or differential pressures. The device is rated to withstand over-pressure up to 2000 psi.

Application Fields

The PPT2-0300AGN2VS pressure transducer can be used in a wide range of application fields due to its reliable design and construction. It is ideal for applications in the oil and gas industry such as rigs, pipelines, compressors, and tanks. The transducer also finds use in food and beverage applications such as controlling the pressure in fermentation and pump control. The sensor can also be used in environments such as water treatment, HVAC, automotive, and telecommunications.

Working Principle

The PPT2-0300AGN2VS pressure transducer has an internal Wheatstone bridge circuit that produces an electrical output when pressure is applied. The Wheatstone bridge is composed of four resistors that form a bridge configuration when pressure is applied to the sensor’s diaphragm. The voltage measured across the bridge is then interpreted to measure and monitor the applied pressure.The Wheatstone bridge circuit is powered by an external voltage source. This voltage source is connected to two points in the Wheatstone bridge. The voltage applied to the Wheatstone bridge will remain stable as long as the electronics are correctly wired and calibrated.The Wheatstone bridge produces an output voltage, either AC or DC, based on the pressure applied to the diaphragm. The output voltage is inversely proportional to the pressure applied, which means that as the applied pressure increases the output voltage will decrease. The output voltage is proportional to the bridge voltage, which is then measured by the transducer.

Conclusion

The PPT2-0300AGN2VS pressure transducer is a reliable and accurate device for measuring pressure in a wide range of applications. Its internal Wheatstone bridge circuit produces an electrical output when pressure is applied to the diaphragm. This output is then interpreted by an external unit to measure and monitor the pressure. The device is also corrosion-resistant so it is ideal for corrosive environments. It can be used to measure absolute, sealed, or differential pressures and is rated to withstand over-pressure up to 2000 psi.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description