PQ1R28J0000H

The PQ1R28J0000H is a linear voltage regulator that is commonly used in a wide range of industrial and commercial applications. Specifically, the PQ1R28J0000H is a low dropout (LDO) linear regulator that is used to regulate the output voltage of a power supply. It has a wide input voltage range of 5 to 36 volts, and a very low dropout voltage, typically less than 400 mV. The device is designed to provide up to 1.5 Amp of load current with a maximum ambient temperature of 105°C.

When using the PQ1R28J0000H, it is important to set the output voltage properly. This can be done by setting the external voltage reference or by setting the external bypass resistor. When using an external voltage reference, it should be set to within 0.3V below the desired output voltage. This ensures that the output voltage is as close to the target voltage as possible. With an external bypass resistor, the desired output voltage can be obtained by selecting a resistor value between 5 and 50 ohms.

The PQ1R28J0000H is a non-inverting linear regulator, meaning that the output voltage is the same polarity as the input voltage. This makes it simple to use, as no external components are required. In addition, the device can operate at temperatures of up to 85°C with an operating current of up to 1.3 amps. The device also features thermal overload protection, reverse current protection and short circuit protection, ensuring reliable operation.

In summary, the PQ1R28J0000H is a linear voltage regulator with a wide range of applications. It can be used in industrial and commercial settings and provides reliable operation with thermal overload protection, reverse current protection and short circuit protection. Its wide input voltage range and low dropout voltage make it ideal for a variety of voltage regulation tasks.