PQ6RD83BJ00H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC stands for Power Management Integrated Circuit, which is a circuit used to manage the power supply of electronic components. The PQ6RD83BJ00H is a linear voltage regulator, which is a device that regulates the voltage of a signal or a power supply. It is used to regulate any voltage signal between a defined range to ensure that the electronic components being powered by the signal receive only the amounts of power necessary for them to operate correctly, while avoiding any voltage spikes that could be damaging to the components.The PQ6RD83BJ00H is a linear voltage regulator which operates in the input voltage range of 4.5 V to 20 V, and output voltage range of 4.75 V to 18 V. This PQ6RD83BJ00H voltage regulator features a very low dropout voltage, typically less than 1.2V at 400mA, which is important for applications involving low input voltages. It also features a minimum output current of 25mA. Finally, the PQ6RD83BJ00H provides short circuit and over-voltage protection, and is built using the Linear Technology\'s process technology.

The PQ6RD83BJ00H voltage regulator is well suited for a variety of applications, including powering low-power embedded systems and other low-power portable electronics. It can be used to regulate voltage in a variety of circuits, from audio amplifiers to microcontrollers. In addition, it is well suited for applications where low input voltage is required, such as battery-powered devices. The PQ6RD83BJ00H is also well suited for applications where a low output voltage drop is necessary, such as when powering an MCU or an RF transceiver.

The PQ6RD83BJ00H voltage regulator works by controlling the amount of current supplied to the load. It uses an internal transistor to control the flow of current between the input and the output. When the input voltage is larger than the output voltage, the transistor is turned on, and current is allowed to flow from the input to the output. When the input voltage is smaller than the output voltage, the transistor is turned off and the current is blocked. The amount of current supplied to the load can be adjusted by varying the voltage on the base of the internal transistor. The regulation circuitry prevents any overvoltage or undervoltage conditions from occurring by turning off the transistor.

In summary, the PQ6RD83BJ00H is a linear voltage regulator designed for low dropout applications. Its input voltage range is 4.5V to 20V and output voltage range is 4.75V to 18V. The PQ6RD83BJ00H features a low dropout voltage of less than 1.2V at 400mA, and a minimum load current of 25mA. It provides short circuit and over-voltage protection. It is well suited for a variety of applications, such as powering low-power embedded systems and other low-power portable electronics.

The specific data is subject to PDF, and the above content is for reference