PRF20-Q110-S12N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are devices that convert direct current (DC) from one voltage level to another. The PRF20-Q110-S12N is a DC-DC converter designed for high power applications. It is a switched mode design for power conversion, and it is capable of operating at voltages from 0.55 to 0.90 V. It features a power switch, a control IC, an external diode, a voltage divider, and a load switch. This converter provides an efficiency of up to 90% for short-term applications.

The PRF20-Q110-S12N is typically used as a low voltage / high voltage step-up DC-DC converter. This means that it takes in a low voltage DC source, and steps up the voltage to a much higher voltage level, such as 24V or 120V. This type of converter is often used in applications such as solar panel charging systems, battery charging systems, and other power supply applications that require high voltages.

The working principle of the PRF20-Q110-S12N is based on the inductor-capacitor (LC) voltage-regulator principle. When a voltage is applied to the input terminals of the converter, a switching device in the converter will activate and cause a current to flow through an inductor and external resistor. This inductor is the main energy storage element in the converter and it will store up a magnetic field, which is proportional to the input current. The inductor-capacitor (LC) voltage-regulator will then regulate the power output so that the output voltage remains within specified levels.

Another important part of the working principle of the PRF20-Q110-S12N is the external diode and the voltage divider. The external diode in the converter is there to ensure that the input voltage is constant, since the diode acts like a switch that keeps the voltage from dropping when the power switch is off. The voltage divider is there to make sure that the output voltage is within specified levels. The voltage divider will set the output voltage according to the voltage applied to it from the input.

The PRF20-Q110-S12N is often used in applications that require high power outputs and long operating times. Its high efficiency and its low power losses make it an ideal choice for applications that require high power conversions. Its ability to step up a low voltage DC source to a high voltage makes it ideal for use in solar panel charging systems, as well as other applications requiring direct current. Its working principle is based on the inductor-capacitor (LC) voltage-regulator principle, and its external diode and voltage divider are used to ensure that the output voltage remains within specified levels.

The specific data is subject to PDF, and the above content is for reference