PS2561AL-1-V-H-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components designed to provide galvanic isolation in a circuit, usually between two different power sources. This is important for protecting sensitive circuitry from the effects of EMF, ESD, and other noise. The PS2561AL-1-V-H-A is an optoisolator device that provides transistor, photovoltaic output. This optoisolator is specifically designed for portable applications.

The optoisolator works as an interlocking, electric, and optical bridge between two circuits- one in the high voltage, transient, and noisy environment, and the other in the low noise, static environment. In this case, the PS2561AL-1-V-H-A provides an electrical seal between the two sides of the circuit, allowing the low noise, static on the other side to remain untainted by the high voltage, transient and noise on the other side. This is done through the use of an LED emitting infrared light and a photodiode and transistor amplifying circuit.

The infrared LED emits light, which is then detected by the photosensitive device, usually a photodiode. This photodiode generates current when the light is detected and causes the electrical potential of the LED side of the circuit to increase. The increased potential then flows through the coupling capacitor, allowing the current to flow between the two sides. This current then activates the transistor in the device, which amplifies the current and provides the required signal to the output of the optoisolator.

The PS2561AL-1-V-H-A optoisolator is designed specifically for portable applications. It features an LED that allows for high speed operations (up to 3MHz) and low energy consumption (2.3mW typical). The LED works over a wide range of temperatures (-20°C to 85°C) and has very low thermal resistance. Additionally, the device has a low profile with a 0.7mm Gold-Bonded wire bond and an operating voltage of up to 5.5V. This makes the device ideal for use in low power portable applications, such as handheld and mobile devices.

The PS2561AL-1-V-H-A optoisolator is a reliable and cost effective solution for providing galvanic isolation in portable applications. Its small size, low power consumption, and wide temperature range provide manufacturers with flexibility and reliability for their device designs. Additionally, its high speed operation and wide operating voltage make it an ideal choice for many applications that require high performance and low power consumption.

The specific data is subject to PDF, and the above content is for reference