PS2701A-1-F3-M-A

Output Type:	Transistor
Supplier Device Package:	4-SOP
Package / Case:	4-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 100°C
Vce Saturation (Max):	300mV
Current - DC Forward (If) (Max):	30mA
Voltage - Forward (Vf) (Typ):	1.2V
Current - Output / Channel:	30mA
Voltage - Output (Max):	70V
Series:	NEPOC
Input Type:	DC
Rise / Fall Time (Typ):	5µs, 7µs
Turn On / Turn Off Time (Typ):	--
Current Transfer Ratio (Max):	150% @ 5mA
Current Transfer Ratio (Min):	50% @ 5mA
Voltage - Isolation:	3750Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PS2701A-1-F3-M-A is a type of optoisolator device, which belongs to the Transistor, Photovoltaic Output category of optoisolators. Optoisolators are a type of optoelectronic component, which consists of a discrete optical source, such as an LED, and a photosensitive detector, such as a phototransistor, all housed in a single package. The optoisolator device transfers electrical signals between two isolated circuits, while blocking unfiltered noise, transients and other interference. The PS2701A-1-F3-M-A is an optoisolator device with a photovoltaic output, which consists of a series of one or more phototransistors, with the necessary bias voltage, and a receiver circuit, with the required amplification and gain. The device has an isolation voltage of up to 1791 Vrms (50/60 Hz), and a power consumption of about 0.74 mW. The PS2701A-1-F3-M-A is commonly used in signal isolation and conditioning applications, such as amplifying, combining, and separating signals, and in industrial control and automation systems. It is also used in noise filtering, voltage isolation, and ground loop isolation applications. The device can also help prevent transient spikes from reaching sensitive electrical components, thus protecting them from damage. Additionally, the PS2701A-1-F3-M-A can be used to transfer signals across different circuits, without the need for physical connections. The principle of operation of the PS2701A-1-F3-M-A optoisolator device is based on the photovoltaic effect. In this process, when light is shone onto a semiconductor material, it creates an electric field which causes a voltage to be generated. This generated voltage is then amplified by the output circuit, and applied to the receiving circuit. The size of the voltage depends on the intensity of the light it is exposed to and the gain of the amplifier. As a result, the input signal from one circuit is replicated on the output of the receiving circuit, while providing electrical isolation. Overall, PS2701A-1-F3-M-A optoisolator devices are ideal for a wide range of applications, where electrical isolation and noise filtering are required. These devices are becoming increasingly popular in industrial automation and control systems, due to their performance and reliability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description