PS2705-1-M-A

Output Type:	Transistor
Supplier Device Package:	4-SOP
Package / Case:	4-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 100°C
Vce Saturation (Max):	300mV
Current - DC Forward (If) (Max):	50mA
Voltage - Forward (Vf) (Typ):	1.1V
Current - Output / Channel:	80mA
Voltage - Output (Max):	40V
Series:	NEPOC
Input Type:	AC, DC
Rise / Fall Time (Typ):	3µs, 5µs
Turn On / Turn Off Time (Typ):	--
Current Transfer Ratio (Max):	150% @ 5mA
Current Transfer Ratio (Min):	50% @ 5mA
Voltage - Isolation:	3750Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PS2705-1-M-A is an optoisolator manufactured by Panasonic. It is classified as a transistor-photovoltaic optoisolator, and is used in a variety of applications to isolate two electrical circuits. This component is suitable for use in electric, automotive, computer, and instrumentation systems.Optoisolators are used to provide electrical isolation between two electronic devices, so that no current flows between them. Typically, one circuit (the input) provides an electrical signal to the optoisolator, while the other circuit (the output) receives a signal from the optoisolator. This electrical isolation helps to protect both circuits from interference, thus increasing the efficiency of the system in which it is used.The PS2705-1-M-A optoisolator consists of an infrared light-emitting diode (LED) and a phototransistor. The LED is used to generate the input signal by emitting infrared light, while the phototransistor converts this light into an electrical output. This electrical output is then sent to the output circuit.The LED is powered by a separate power supply, which supplies the voltage needed to operate the optoisolator. The LED then converts the incoming electrical signal into an infrared signal. This signal is then sensed by the phototransistor. When the phototransistor receives the infrared light, it switches the electrical output on or off, depending on the intensity of the light.It is important to note that the PS2705-1-M-A optoisolator has a limited voltage handling capability (3.0V to 5.5V). It is also important to note that the optoisolator will not be able to operate if the supply voltage is outside of its operating range.The PS2705-1-M-A optoisolator works well in applications where the input circuit is large and the output circuit is small. It is also useful in applications where the two circuits need to be electrically isolated from each other. This optoisolator is suitable for use in a wide variety of applications, including automotive, computer, and instrumentation systems.The PS2705-1-M-A optoisolator is an excellent choice for an optoisolator due to its reliability and long operating life. The optoisolator is easy to install and can be used in a wide variety of applications. It is also a cost-effective solution for isolating two circuits from one another.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description