PS2711-1-V-F3-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, or opto-isolators, are devices designed to isolate the “input” side of the circuit from the “output” side of the circuit. This isolation is provided by emitting light from an electrical pulse on the input side, this light is then used to transfer the information to the output side, but not allow the electricity to pass through. Transistor, Photovoltaic Output is one type of optoisolator and the PS2711-1-V-F3-A is an example of this type.

The PS2711-1-V-F3-A is a digital optoisolator that uses an infrared LED to emit light, which is then detected by a photovoltaic receiver on the output side. The light emitted by the LED is modulated with a special encoding to send or receive digital signals without allowing high voltage electricity to pass across the isolation barrier. This optoisolator is designed to be used in digital signal applications, and is most commonly used in switching, feedback, and level shifting applications.

The PS2711-1-V-F3-A is an ideal device for use in a variety of applications including instrumentation, automotive, and industrial equipment. This device can be used in digital signal applications in which a signal needs to be converted from a low voltage level to a higher voltage level. The device can also be used to transfer a signal, such as an output from a logic circuit, across an optocoupler. This is especially useful in applications such as motor control, switches, and relays where the current can be too high to be connected to the logic circuit directly.

The PS2711-1-V-F3-A works by sending an electrical pulse to the LED, which then emits an infrared light. This light is then detected by the photovoltaic receiver on the output side and converted back into an electrical signal. The device can be used with 3.3 or 5.0V power supplies and has an open collector output. It allows for signal transfer without isolation, meaning that the signal can be transferred without an isolation barrier.

The PS2711-1-V-F3-A digital optoisolator is an ideal choice for use in a variety of digital signal applications. Its ability to transfer digital signals and provide isolation makes it an ideal device for instrumentation, automotive, and industrial applications. By providing a signal transfer between circuits that do not require an isolation barrier, the PS2711-1-V-F3-A optoisolator can provide a reliable and efficient solution to digital signal transfer needs without sacrificing safety or convenience.

The specific data is subject to PDF, and the above content is for reference