PS2733-1-V-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components that use light to electrically isolate one part of a circuit from another. This isolation is typically accomplished by using light driven opto-coupler components such as PS2733-1-V-A. This device has a photovoltaic output transistor, and it is designed for controlling larger DC loads.

The PS2733-1-V-A comprises of a Infrared LED (Light Emitting Diode) and Phototransistor that are mounted side by side. The IR LED is an input signal port while the phototransistor is an output signal port. Light from the LED is detected by the collector of the phototransistor, switch the load current path on and off accordingly. Hence, an electrical isolation is created between the input control and output load.

In PS2733-1-V-A application, the input is an Infrared LED which can be operated with various input signals such as DC, AC or pulse. The output is a phototransistor. The operating frequency of this device can range from dc up to about 10kHz. The PS2733-1-V-A can drive up to a maximum of 25mA DC current load which is considered as high for such an optoisolator.

The PS2733-1-V-A has an isolation voltage rating of 3.75kVrms and a maximum creepage distance of 8mm. This ensures the high-level safety performance of the device. The device is encapsulated in an epoxy package with a peak forward current of 20mA and a maximum reverse voltage of 5V.

The working principle of the PS2733-1-V-A optoisolator is very simple. The input signal that is generated by control circuitry activates the LED and produces light radiation. This light radiation is then detected by the collector of the photon transistor, and an electric current is induced that controls the output. The output transistor then switches the load current path on and off accordingly.

The application field of the PS2733-1-V-A optoisolator is extremely wide ranging. Commonly, it is used in industrial control systems for making signals isolation, providing over-current protection, as well as in high frequency signal noise filtering. PS2733-1-V-A optoisolators are ideal for use in DC or AC circuits, direct current control circuit, or any other similar control application.

In conclusion, the PS2733-1-V-A optoisolator is an efficient, cost-effective, and reliable optoisolator. It offers a high degree of isolation between the input control and output load, and provides a 3.75kVrms isolation voltage rating. This optoisolator is widely used in industrial control systems, over-current protection, directly current control circuits, and any other similar control application.

The specific data is subject to PDF, and the above content is for reference