PS2913-1-M-AX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components that use light to separate electrical signals. The PS2913-1-M-AX optoisolators fall under the category of transistor, photovoltaic output type. This type of optoisolator utilizes a phototransistor as its output component, and works on the principle of connecting a light source, such as an LED, with the output of a circuit. When the light source is activated, the phototransistor responds accordingly and additional circuitry can then be used for further signal conditioning.

The most common application for PS2913-1-M-AX optoisolators is for the isolation of two circuits from each other, while still allowing for communication between the two. This is typically done in order to prevent potential electrical noise or interference from one circuit affecting the other. The optoisolator also serves the purpose of providing electrical isolation between circuits that operate at different levels. This helps to promote safety during operation, as the two circuits remain insulated, reducing the risk of voltage shock.

In addition to being used for isolation purposes, the PS2913-1-M-AX optoisolator can also be used to interface certain devices with computer systems. This is helpful in cases where the computer needs to communicate with a device that would otherwise be difficult to directly control. For example, the optoisolator could be used to control an electromechanical actuator, such as a valve or motor, or to interface with external sensors that cannot be connected directly to the computer.

The PS2913-1-M-AX optoisolator is made up of three main components: the light source, the phototransistor, and the supporting circuitry. The light source is typically an LED, which emits a light signal when it is energized. The phototransistor, meanwhile, is an NPN silicon phototransistor that responds to the light signal. This causes its collector-emitter voltage to go from a high to a low state, depending on whether or not the LED is energized. Finally, the circuit includes a series of resistors and capacitors, which are used to provide power to the optoisolator and adjust its gain and speed.

Overall, the PS2913-1-M-AX optoisolator has a number of applications, from isolating two circuits from each other or interfacing with computer systems. It utilizes a combination of an LED as a light source and a phototransistor as its output, along with supporting circuitry, and is designed to provide reliable and safe isolation and signal conditioning.

The specific data is subject to PDF, and the above content is for reference