PS7141-2B-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are electrical contacts which control AC or DC loads using a semiconductor, instead of a mechanical contact like a traditional relay. The PS7141-2B-A is a two-pole, dual-throw, solid state relay ideal for a wide field of applications.

The PS7141-2B-A can switch large currents from 3 to 30 A and, given its wide field of tension of 12 V to 230 V AC and 24 V to 380 V DC, can be used in many applications. Typical fields of application are the following: contactor for F1 to F4 induction motors, fused motor starters, magnetic motor starters, light control, heating control, equipment gate control and powering multiple outlets.

The working principle of the PS7141-2B-A is based on light, sound or temperature signals to control AC or DC loads without mechanical contacts. The control input of the PS7141-2B-A is connected to a light, sound or temperature signal, such as a light sensor, microphone, thermocouple or thermistor, which generates an input voltage. Then, thanks to a triac, the input voltage is converted into a conduction control current to manage AC or DC devices.

The light, sound or temperature sensors can be used to detect the presence or absence of a person, a vehicle or an object. For instance, an LED or a photoresistor can be mounted in a doorframe, and both the opening and closing of the door can be detected by checking the light or temperature levels in the room.

The control input and the load signal of the PS7141-2B-A must be electrically isolated from one another to avoid the interruption of the load-side circuit. The most common insulation method in solid state relays is optically coupling, where the input signal is isolated from the load side by using an infrared LED and a phototransistor.

The PS7141-2B-A can reduce the need for complex wiring and, thanks to its high speed, can achieve a high switching frequency, making it ideal for use in many applications.

In conclusion, the PS7141-2B-A is an ideal device to switch large currents of 3-30 amps, AC or DC, at high speed and with a wide field of tension. Its versatility allows it to be used in many applications, from light control to equipment gate control. Its control input is isolated from the load side signal, making it simpler to use and protecting the load side circuit.

The specific data is subject to PDF, and the above content is for reference