PS7141L-2A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays

Solid state relays are a type of electronically controlled switch used to control power delivered to an electrical load. Unlike the electromechanical relays of the past, solid state relays are completely controlled by a voltage or current, making them much more versatile and efficient replacements for the traditional relays. PS7141L-2A are a type of solid state relays that offers the user several benefits over other types of relays.

PS7141L-2A Application Field

PS7141L-2A are general-purpose, isolated, solid state relays typically used for lighting control, HVAC systems, motor control applications, and industrial process control. They offer the user several advantages over traditional electromechanical relays, including higher efficiency, lower power consumption, greater accuracy, superior reliability, longer life expectancy, and higher switching speeds. They are available in multiple configurations, including ac/dc switching, ac switching only, and dc switching only, making them suitable for a wide range of application scenarios. Some of the typical applications of the PS7141L-2A relays include motor control, lighting control, industrial process control, HVAC system control, temperature control, and automatic doors.

PS7141L-2A Working Principle

The PS7141L-2A is an optically isolated, single-pole, normally open, solid state relay. The control voltage used to activate the relay is isolated from the switched voltage, allowing the user to control large electrical loads without additional safety protection measures. The input voltage range is DC 3V to DC 32V, and the relays can switch up to 30A of maximum load current and up to 600V of maximum load voltage. The relay also provides a high-speed, reverse-polarity protection that prevents the user from accidentally reversing the voltage polarity when connecting the supply voltage and load.

The relay is controlled by a TTL signal, typically 4V to 5V of DC power. The TTL signal is used to activate a light-emitting diode (LED) which then produces a visible light beam. The visible light beam is used to turn the relay ON or OFF. When the LED is turned ON, the light beam hits a photodiode that acts as the switching element. The opto-coupler connected between the input and output isolates the two parts of the circuitry, ensuring safe operation. When the relay is turned ON, the photodiode will conduct and allow current to flow through the relay.

The PS7141L-2A is a high-performance, solid state relay and is suitable for a wide range of applications. The relay is available as a board-mounted package or as a plug-in module, making it easy to install and modify it in different types of circuits. Its small size, low power consumption, and high switching speed make it an ideal choice for applications requiring efficient control and switching of high power loads.

The specific data is subject to PDF, and the above content is for reference