Allicdata Part #: | PS7241-1C-ND |
Manufacturer Part#: |
PS7241-1C-A |
Price: | $ 0.00 |
Product Category: | Relays |
Manufacturer: | CEL |
Short Description: | SSR OCMOS FET 120MA NO/NC 8-SOP |
More Detail: | Solid State Relay SPST-NO + SPST-NC (1 Form A and ... |
DataSheet: | PS7241-1C-A Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | PS, OCMOS |
Packaging: | Tube |
Part Status: | Obsolete |
Mounting Type: | Surface Mount |
Circuit: | SPST-NO + SPST-NC (1 Form A and B) |
Output Type: | AC, DC |
Voltage - Input: | 1.2VDC |
Voltage - Load: | 0V ~ 400V |
Load Current: | 120mA |
On-State Resistance (Max): | 30 Ohms |
Termination Style: | Gull Wing |
Package / Case: | 8-SOP (0.173", 4.40mm Width) |
Supplier Device Package: | 8-SOP (2.54mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Solid state relays (SSRs) are a form of contactless electronic switch that is activated using an electrical signal. The PS7241-1C-A is a type of SSR that consists of one or more semiconductor components along with a control device, which are all enclosed into a package. It is designed to switch AC and/or DC loads in one or more directions without any physical contact between input and output, allowing for significant energy savings, minimal noise, and longterm reliability.
The PS7241-1C-A has a working voltage range of 0.4 to 32 VDC or AC and a load current range of 0.5 to 25 Amps. It also features high efficiency, low power consumption, and a low switching frequency. It is suitable for a variety of applications such as motor control, lighting control, and heating systems. In particular, it is often used in industrial systems due to its long life-span and high reliability.
This SSR operates using two electrical signals: an input signal and an output signal. The input signal is usually provided by an external source such as a PLC, CPU, or other control system. The input signal is then converted into an output signal, and the output signal is used to activate the switch in the device. The output signal is usually much lower in power than the source signal and must be amplified in order to trigger the switch.
The switching mechanism of the PS7241-1C-A is based on a zero-cross detection and output state control system. This system enables the SSR to perform on/off switching operations with a frequency of up to 10 kHz in both AC and DC load conditions. The device has two LEDs that indicate the status of the load at all times. It also features a clear isolation path to reduce electrical noise and interference.
The PS7241-1C-A SSR is designed for home and light commercial applications, and it is a cost-effective option for the automatic switching of AC or DC loads. It is easy to install and can be controlled using various electrical signals such as those provided by PLCs or CPUs. It is a reliable and low-maintenance device that is suitable for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PS7224 | Tripp Lite | 55.43 $ | 1000 | POWER STRIP 72" 24 OUT 15... |
PS7224-20HW | Tripp Lite | 61.82 $ | 1000 | POWER STRIP 72" 24 OUT NO... |
PS725B | Tripp Lite | 23.86 $ | 17 | 7 OUTLET POWER STRIP 25FT... |
PS7224-20 | Tripp Lite | 75.26 $ | 1000 | POWER STRIP 72" 24OUT 15'... |
PS7224-20T | Tripp Lite | 80.63 $ | 1000 | POWER STRIP 72" 24OUT 15'... |
PS7241-2A | CEL | -- | 1000 | SSR OCMOS FET 120MA NO 8-... |
PS7211-2A-F3 | CEL | -- | 1000 | SSR OCMOS FET 100MA NO 8-... |
PS7241-1A | CEL | -- | 1000 | SSR OCMOS FET 120MA NO 4-... |
PS7206-1A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 600MA NO 4-... |
PS7241-1B | CEL | -- | 1000 | SSR OCMOS FET 120MA NC 4-... |
PS7214-1A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 400MA NO 4-... |
PS7200A-1A | CEL | -- | 1000 | SSR OCMOS FET 100MA NO 4-... |
PS7200B-1A | CEL | -- | 1000 | SSR OCMOS FET 250MA NO 4-... |
PS7200K-1A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 200MA NO 4-... |
PS7200R-1A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 120MA NO 4-... |
PS7200H-1A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 160MA NO 4-... |
PS7241-1A-F3 | CEL | -- | 1000 | SSR OCMOS FET 120MA NO 4-... |
PS7241-1B-F3 | CEL | 0.0 $ | 1000 | SSR OCMOS FET 120MA NC 4-... |
PS7206-1A-F3 | CEL | 0.0 $ | 1000 | SSR OCMOS FET 600MA NO 4-... |
PS7214-1A-F3 | CEL | 0.0 $ | 1000 | SSR OCMOS FET 400MA NO 4-... |
PS7200A-1A-F3 | CEL | 0.0 $ | 1000 | SSR OCMOS FET 100MA NO 4-... |
PS7200B-1A-F3 | CEL | 0.0 $ | 1000 | SSR OCMOS FET 250MA NO 4-... |
PS7200E-1A-F3 | CEL | 0.0 $ | 1000 | SSR OCMOS FET 250MA NO 4-... |
PS7200K-1A-F3 | CEL | 0.0 $ | 1000 | SSR OCMOS FET 200MA NO 4-... |
PS7200R-1A-F3 | CEL | 0.0 $ | 1000 | SSR OCMOS FET 120MA NO 4-... |
PS7200H-1A-F3 | CEL | 0.0 $ | 1000 | SSR OCMOS FET 160MA NO 4-... |
PS7200A-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 100MA NO 4-... |
PS7200A-1A-F3-A | CEL | -- | 1000 | SSR OCMOS FET 100MA NO 4-... |
PS7200B-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 250MA NO 4-... |
PS7200E-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 250MA 1CH N... |
PS7200E-1A-E3-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 250MA NO 4-... |
PS7200H-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 160MA NO 4-... |
PS7200H-1A-F3-A | CEL | -- | 1000 | SSR OCMOS FET 160MA NO 4-... |
PS7200K-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 200MA NO 4-... |
PS7200K-1A-F3-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 200MA NO 4-... |
PS7200R-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 120MA NO 4-... |
PS7200R-1A-F3-A | CEL | -- | 1000 | SSR OCMOS FET 120MA NO 4-... |
PS7205B-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 500MA 1CH N... |
PS7205B-1A-F3-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 500MA 1CH N... |
PS7241-1C-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 120MA NO/NC... |
SSR ZERO SW 480V 16ASolid State
RELAY SSR SPST-NO 20V 4USOPSolid State R...
RELAY DUAL 25A 240V ZC 4-15VDCSolid Stat...
CTRLR TEMP SSR 480V 90A AC OUTSolid Stat...
CTRLR TEMP SSR 240V 90A AC OUTSolid Stat...
RELAY SSR 18A 240VAC AC OUT QCSolid Stat...