PS9505L3-E3-AX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PS9505L3-E3-AX is a type of Isolators - Gate Drivers. It is specifically designed to provide electrical isolation between integrated circuit, such as DSPs, Microprocessors, and analog/digital control systems, and the low voltage or high voltage power electronics. This gate driver is therefore said to have a combination of electrical isolation, low power consumption, and high-efficiency switching.

The application of PS9505L3-E3-AX is in controlling electrical isolation in order to condition signals before they enter the system, protect signal sources from damages caused by dangerous voltages, and to even as a way to reduce the possibility of ground loop noise. A more common use for PS9505L3-E3-AX is in the field of communication technology and medical equipment. The device helps to condition the signal when passing through the electrical circuitry.

The working principle of PS9505L3-E3-AX is based on using an electrical isolator, most often implemented in the form of a transformer, in combination with high frequency signal processing. In this design, the low voltage signal is first converted to a high-frequency pulse-width modulated (PWM) signal by the integrated circuit (IC). This PWM signal is then input into the isolator, which couples the signal over to the output side of the circuit. On the output side, the PWM signal is then processed by an output circuit, which converts it back into the original digital or analog signal with the help of the isolator.

An isolator typically isolates (separates) the most sensitive part of an electrical circuit from a current carrying component. The isolator transfers power but does not allow current to flow between the two sides. This allows the circuit to be perfectly insulated from the other parts of the system, preventing a dangerous amount of voltage from reaching the sensitive components or circuits in the system.

In a PS9505L3-E3-AX, the isolator is typically constructed from a magnetic material, such as ferrite or powder, and typically has an impedance of around 50 ohms. This ensures that only a certain amount of power can be transferred across the isolator, reducing the chances of an overload in the device. The device is then protected against any overloads by means of a voltage protection network, which ensures that the device does not exceed the voltage tolerance level of the device itself.

The PS9505L3-E3-AX is highly reliable, and is quite commonly used in many different applications. In general, it is designed for use in high voltage applications, and is used to provide electrical isolation between sensitive components and circuits, and the dangerous voltages that may otherwise be present in the system. This makes it an excellent choice for use in communication technology, medical equipment, and other devices where electrical isolation is required.

The specific data is subject to PDF, and the above content is for reference