PS9513L1-AX

Data Rate:	1Mbps
Supplier Device Package:	8-DIP
Package / Case:	8-DIP (0.400", 10.16mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 100°C
Voltage - Supply:	4.5 V ~ 20 V
Current - DC Forward (If) (Max):	25mA
Voltage - Forward (Vf) (Typ):	1.65V
Rise / Fall Time (Typ):	--
Propagation Delay tpLH / tpHL (Max):	750ns, 500ns
Series:	--
Current - Output / Channel:	15mA
Output Type:	Open Collector
Input Type:	DC
Common Mode Transient Immunity (Min):	15kV/µs
Voltage - Isolation:	5000Vrms
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PS9513L1-AX is an optoisolator product from OSRAM designed for logic output applications. It provides very high-speed operation up to 50MHz and up to 5V input/output switching. Furthermore, it is capable of operating in extreme temperature environment from -55 to +125 degrees Celsius and has a very small footprint. The core of the PS9513L1-AX is an optocoupler. An optocoupler is an electrical device that transfers electrical signals between two isolated circuits using optical energy. The device typically consists of an input side, which controls the electrical flux of the optical energy, and an output side, which converts the optical signal back into an electrical signal. In the case of the PS9513L1-AX, the input side consists of a light emitting diode, while the output side consists of a phototransistor.The function of the PS9513L1-AX is to provide logic output and electrical isolation between the input and output sides. It can be used in a variety of applications where both electrical isolation and output logic is needed. Possible applications include medical, telecommunications, industrial automation, automotive, and white goods.The PS9513L1-AX operates on a principle known as near-zero leakage current. This means that the optocoupler only conducts a very small amount of current to ground when switched off, reducing power consumption and preventing any unwanted or hazardous conditions.The optocoupler is also equipped with Schmitt Trigger circuitry. This circuitry ensures that the output stays in a HIGH state until the input side reaches a predetermined voltage level. This helps to ensure that spurious signals and transients are not received at the output side and that the output remains in a logical state. In addition, the PS9513L1-AX has built-in Fast-Turn Driver (FTD) circuitry. FTD circuitry allows the output side to switch faster than an ordinary optocoupler by providing higher voltage to the output side from its integrated FTD.Finally, the optocoupler also features a logic gate output, which provides a digital logic output signal from its input. This makes the PS9513L1-AX ideal for logic output applications, as it eliminates the need for an additional logic gate.The PS9513L1-AX provides a cost-effective solution for logic output applications. It has a very small footprint, operates in extreme temperature environments, has near-zero leakage current, and features FTD circuitry and a logic gate output. This allows designers to create reliable, high-performance electrical isolation with minimal power consumption.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description