PS9551AL4-E3-AX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PS9551AL4-E3-AX is a special purpose data acquisition device that is used in a variety of applications for collecting and processing data. This device is part of the Analog Devices, Inc. (ADI) portfolio of data acquisition components and is comprised of a microcontroller and a sampling analog-to-digital converter (ADC). The PS9551AL4-E3-AX is designed for use in data logging and sensor measurement applications and can be used in a range of applications from automotive to industrial control. This device is capable of measuring and processing a wide range of signals from sound pressure to temperature.

The PS9551AL4-E3-AX features a high-speed analog-to-digital converter with a low power consumption that allows it to operate in low power and ultra-low power environments. The ADC operates at a sample rate of 10 MHz and has a resolution of 14 bits thereby ensuring accurate data collection. The ADC is also capable of 16-bit resolution, but requires higher power consumption. The PS9551AL4-E3-AX also features a Digital Processing Unit (DPU), which is capable of managing three general-purpose timers and two digital filters. This allows it to perform a wide range of signal processing functions.

The PS9551AL4-E3-AX combines the capabilities of the ADC and DPU by providing an integrated system for data acquisition that can be used for real-time measurement and control. It is designed to interface with a host microcontroller through an I2C communication interface. The host microcontroller can be programmed to communicate with the PS9551AL4-E3-AX and receive collected data as well as transfer commands through the I2C interface. The PS9551AL4-E3-AX contains a register set that enables a host microcontroller to configure the device to suit specific application requirements.

The PS9551AL4-E3-AX also provides the capability for signal calibration. This involves the use of a Look Up Table (LUT) to convert digital signal values into accurate analog readings. This can be used in a range of applications including sound level monitoring. The LUT also allows the device to operate with a wide range of input signals from 0 to 3.3V.

The PS9551AL4-E3-AX uses a dedicated trigger input for timing-sensitive measurements. This trigger input allows for synchronization between the host microcontroller and the PS9551AL4-E3-AX and is used to control the start and stop of data collection. This feature helps to ensure accurate data collection when sampling multiple channels or when the host microcontroller is under multiple operating conditions.

The PS9551AL4-E3-AX is able to interface with a range of sensors, and can be used with a variety of sensors such as thermocouples, load cells and accelerometers. This allows the device to measure and process physical conditions such as temperature, pressure, and acceleration. The PS9551AL4-E3-AX is also capable of measuring frequency or pulse signals which can be used for motor speed measurements and other similar applications.

The PS9551AL4-E3-AX provides a wide range of capabilities for data acquisition, sensing, and signal processing applications. Its high speed analog-to-digital converter and DPU enable it to be used for real-time data collection and measurement, and its calibration and trigger input provide for accurate data collection. These features make the PS9551AL4-E3-AX a suitable device for use in a range of applications from automotive to industrial control.

The specific data is subject to PDF, and the above content is for reference