Allicdata Part #: | PSM6004IG-LED-ND |
Manufacturer Part#: |
PSM6004IG-LED |
Price: | $ 1.39 |
Product Category: | Uncategorized |
Manufacturer: | Panduit Corp |
Short Description: | COPPER CABLE, CAT 6, 4-PAIR, 22 |
More Detail: | N/A |
DataSheet: | PSM6004IG-LED Datasheet/PDF |
Quantity: | 1000 |
4 +: | $ 1.26000 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The PSM6004IG-LED is an electronically-controlled device designed to provide printed circuit board (PCB) inspection, testing, and functional sequence code writing for use in low- to high-voltage applications. It is a tool for the efficient circuit board manufacturing process, providing such capabilities as rapid prototyping, remote device configurability, hot swapping, intelligent PCBA programming/testing, and embedded electronic-code security.
This versatile device offers a wide range of features for PCBA manufacturing. For instance, it has a digital signal processor (DSP) that allows for automated hardware design debugging and live testing. Furthermore, it features built-in signal timing and tasks modules for fully automated, low-cost PCBA test & programming. In addition, it has an integrated, secure, low-code programming system that enables the writing of engineering codes into the circuit board during the manufacturing process.
The PSM6004IG-LED can be used to inspect, analyze, diagnose, and verify the printed circuit at different stages of the manufacturing process. It is also capable of remote, compliant programming and software updates. Moreover, it enables better device lifecycle management and higher quality of testing and fault detection. In overall, this device is designed to reduce the circuit board inspection and verification time while achieving higher levels of performance.
The working principle behind the PSM6004IG-LED is relatively simple. First, the unit is connected to the PCBA and connected to the controller. The controller then sets the code, which will tell the device what tests to run on the printed circuit board. This code can be manually written or loaded from a pre-programmed list. As the tests are completed, the device generates pass/fail results, which can be viewed in the controller or output file. The final step is to examine the test results and verify the quality and performance of the printed circuit board.
The PSM6004IG-LED is used in a wide range of applications, from consumer electronics to medical equipment, telecommunications, and automation. It is an essential tool for rapid assembly, programming, and testing of low- to high-voltage circuit boards, helping to reduce the cost of manufacturing while improving the quality and reliability of the manufactured product.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PSM60-081A-103B1 | Bourns Inc. | 6.85 $ | 995 | POT SLIDE 10K OHM .5W 60M... |
PSM60-082A-103B1 | Bourns Inc. | 9.92 $ | 1000 | POT SLIDE 10K OHM .5W 60M... |
PSM60-081A-103B2 | Bourns Inc. | 13.17 $ | 803 | POT SLIDE 10K OHM .5W 60M... |
PSM60-082A-103B2 | Bourns Inc. | 18.59 $ | 1060 | POT SLIDE 10K OHM .5W 60M... |
PSM6004BU-LED | Panduit Corp | 1.39 $ | 1000 | COPPER CABLE, CAT 6, 4-PA... |
PSM6004IG-LED | Panduit Corp | 1.39 $ | 1000 | COPPER CABLE, CAT 6, 4-PA... |
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE