PST.F2.BA2.LCE10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fiber optic connectors are an integral part of fiber optic communication systems and applications. The PST.F2.BA2.LCE10 fiber optic connector is one of the most popular models available. In this article, we\'ll provide an overview of the PST.F2.BA2.LCE10 application field and working principle.

Application Field: The PST.F2.BA2.LCE10 is an LC-duplex type of connector, which is used to connect two fiber optic cables. It is designed for data, voice, and video communication systems where low insertion loss and high return loss is needed. It is suitable for single-mode or multi-mode use, typically in low cost products such as LANs (Local Area Networks), SANs (Storage Area Networks), PC applications, HD video applications, and fiber to the home (FTTH) systems. The PST.F2.BA2.LCE10 can also be used in harsh environmental conditions where a rugged connector is needed.

Working Principle: The PST.F2.BA2.LCE10 connector consists of four main components - a ceramic ferrule, a spring, a cap, and an outer shell. The ceramic ferrule is usually formed of ceramic material and is designed to house and secure the fiber. The spring is designed to provide a constant force and ensure a good connection between the connector and the ferrule. The cap is used to ensure the fiber is properly aligned within the connector. Finally, the outer shell offers protection from dirt or dust, and also provides strain relief.

When assembling the PST.F2.BA2.LCE10, the connector and ferrule are usually pre-assembled. The end of the cable is then inserted into the ferrule, and the spring and cap are installed to push the fiber into the ferrule. Finally, the outer shell is installed to secure the connector. During connection, the fiber is cut and polished to ensure the connector makes a good connection with the ferrule.

In order to ensure a good connection, the polishing of the fiber endface is very important. This is done using polishing kits that are available for each type of connector, including the PST.F2.BA2.LCE10. The polishing kits contain everything needed to polish the endface of the fiber to the proper specifications. Once the endface is properly polished, the connector is ready to be connected to the end of the optical cable.

The PST.F2.BA2.LCE10 connector is widely used in fiber optic communication networks due to its low insertion loss and high return loss. It is suitable for networks with short distances and can be used with both single-mode and multi-mode fiber. The rugged design of the PST.F2.BA2.LCE10 makes it suitable for harsh environmental conditions, making it an ideal choice for a variety of different applications.

The specific data is subject to PDF, and the above content is for reference