PTH12040WAST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters are commonly used components in various electrical and electronics applications. The PTH12040WAST DC DC Converter is a widely used type of Convertor, due to its stability and efficiency in conversion. It can convert DC power to AC voltage, allowing for more efficient usage of power.

The PTH12040WAST is a primary switched mode DC DC converter, with an input voltage of 3: 10V and an output voltage of 12V at 40W. It is a step up converter and is mainly used in industrial applications, such as electronic controls. It provides the possibility to power circuits and other components when the input voltage is unstable or higher than 12V.

The PTH12040WAST converter consists of an input filter, a rectifier/regulator, a switching device and an output filter. The input filter removes any noise from the input signal, ensuring the reliability of the conversion process. The rectifier/regulator then converts the AC voltage into a stable DC output. The switching device, usually a transistor or an insulated-gate bipolar transistor (IGBT), adjusts the duty cycle of the output voltage to achieve the desired output voltage. Finally, the output filter smoothens out the switching device\'s output to provide a stable, low-noise output.

The working principle of the PTH12040WAST DC DC converter is based on the switching regulator concept. This concept makes use of a switching device to regulate the output voltage using pulse width modulation (PWM), depending on the magnitude of the output voltage. When the output voltage is lower than the desired value, the switching device increases its duty cycle for a predetermined time to boost the voltage. Similarly, when the input voltage is higher than the desired output voltage, the switching device reduces its duty cycle in order to stop the over-voltage from reaching the load. The switching regulator ensures the safe and efficient operation of the circuit.

The PTH12040WAST DC DC converter is a reliable, stable and cost-effective device that is widely used in various industrial applications. It is used to convert power from unstable sources, such as solar or wind power, into a stable, low-noise output voltage that can be used for powering circuits and other components. Furthermore, it is also used to step up the input voltage when the input voltage is higher than the output voltage.

The specific data is subject to PDF, and the above content is for reference