PVA3054NPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are electronic switching devices that contain no moving parts, instead relying on semiconductor technology to switch the load on and off. The PVA3054NPBF is a single-pole, double-throw, non-polarized, voltage-controlled SSR providing a low-impedance, high-frequency contact control. It is typically used for applications such as switching an AC load, always controlling the load with the same polarity, and controlling the load with bipolar voltage sources. This document provides an overview of the application fields and working principles of the PVA3054NPBF.

Applications of the PVA3054NPBF

The PVA3054NPBF is most commonly used in industrial automation applications. It is suitable for controlling AC or DC loads, such as motors, lights, fans, pumps, and other machine parts, with a continuous working current from 0 to 16A at 60Hz. It has a maximum on-state dissipation of 50W, making it suitable for controlling small and medium loads.

Additionally, this device has a wide operating temperature range from -40°C to +85°C. This makes it suitable for use in harsh industrial environments. It is also suitable for use in hazardous area Classification I. Division 1 and 2, Groups A-C &D, T3, C, and can be used in plant safety monitoring applications.

The PVA3054NPBF is also able to provide an error signal output to indicate an open or closed loop state. It also carries a built-in surge protection to protect the load from accidental damage. This device is designed to be compatible with the most common control networks, such as Modbus, Ethernet, Profibus, and CAN bus.

Working Principle of the PVA3054NPBF

The PVA3054NPBF is an electromechanical-type SSR and uses a DC voltage to control an AC load. It consists of two main components: a photocoupler and a thyristor. The photocoupler is used to transfer a control signal from the control loop to the thyristor, which then switches the load on and off. The thyristor consists of a triggering circuit and a power switch circuit. The triggering circuit is used to detect the DC control voltage and trigger the thyristor to switch the load on and off.

The characteristics of the thyristor enable the relay to switch on the load when the control voltage rises above a certain threshold, and once the load is switched on, the thyristor will remain in the “on” state until the control voltage is removed or drastically reduced. This allows the load to be switched on and off quickly and reliably and without the need for manual switching.

The PVA3054NPBF is also designed to be low-impedance, which allows it to switch the load with minimal voltage drop and without causing sparks or arcing, and with a high-frequency response to minimize power losses in the switching process. Additionally, the device has a built-in surge protection circuit which ensures the load is protected against accidental damage from over-currents or power surges.

The PVA3054NPBF is a reliable and cost-effective solution for many industrial automation applications. With its wide operating temperature range, high-frequency response, and built-in surge protection, this solid-state relay is an ideal choice for controlling a variety of AC and DC loads.

The specific data is subject to PDF, and the above content is for reference