Allicdata Part #: | PX20-FSLP-C2-1-ND |
Manufacturer Part#: |
PX20-FSLP-C2-1 |
Price: | $ 0.00 |
Product Category: | Uncategorized |
Manufacturer: | JAE Electronics |
Short Description: | CONN PCMCIA CARD |
More Detail: | N/A |
DataSheet: | PX20-FSLP-C2-1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | * |
Part Status: | Obsolete |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
PX20-FSLP-C2-1 Application Field and Working Principle
PX20-FSLP-C2-1 is a type of recloser control system that is used to control and monitor the functionality of the associated electrical system. The PX20-FSLP-C2-1 system is designed to automatically interrupt or reset circuit breakers during overcurrent or short circuit conditions. This allows for enhanced control of the system and improved operation of the power network.
The PX20-FSLP-C2-1 system utilizes a range of components to monitor the system. It includes a centralized controller and field interface modules to provide an interface with the system. The central controller, field interface modules and the associated reclose accessories are connected via copper wire. The controller is equipped with a vane-type overcurrent relay (VFO) to monitor the current conditions in the system. The VFO is used to detect any time there is an overcurrent or a short circuit present in the system.
The VFO can also be used to measure a range of voltage parameters. These include the peak value of the measured current, the rate of rise of the current, and the average value of the current. The central controller is also equipped with a differential relay to detect any instance of differential current present in the system. This relay is used to detect any faults in the cable, transformer or circuit breaker.
Once a fault is detected, the system will send a signal to the field interface modules and reclose accessories. These devices will then initiate an action to interrupt the power system. The reclose accessory is used to reset the circuit breakers once the fault has been cleared. The system can also be programmed to monitor the current and voltage conditions of the system over a long-term basis.
The PX20-FSLP-C2-1 system can be used in a variety of applications. One of the main applications of this system is in the monitoring of a power transmission or distribution system. It is also used to manage the operation of the circuit breakers in the system. This system can also be used to control the thermal parameters of the system. It can be used to monitor the temperature rise seen when the electricity is transferred through the system.
The PX20-FSLP-C2-1 system can be used to manage the operation of the generator, transmitter, or distribution transformer in the system. It is also used to manage the protection system, such as differential protection, overload protection, temperature protection, and undercurrent protection. This system can also be used to trigger the controlling the switchgear of the system.
The working principle of the PX20-FSLP-C2-1 system is based on the measurement of current and voltage parameters. The system is designed to respond to any deviations from the predefined values in the system. If any of the parameters exceed the maximum specified level, the system can then initiate an action to interrupt the power network.
The PX20-FSLP-C2-1 system can be used to monitor and control the electrical system. It can be used to protect the voltage and current of the system. It is used to detect and interrupt fault conditions in the power network. It can also be used to manage the operation of the circuit breakers and the protection systems in the system.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PX20-BB2-C100 | JAE Electron... | 3.28 $ | 1000 | CONN PCMCIA CARD PUSH-PUL... |
PX20-FSR15N-A2 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD PUSH-PUS... |
PX20-FSR15H-C2 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD PUSH-PUS... |
PX20-FSR15N-A2-1 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD PUSH-PUS... |
PX20-FSLP-C2 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD PUSH-PUS... |
PX20-SSR15K-C2 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD PUSH-PUS... |
PX20-BB2-E1000 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD PUSH-PUL... |
A16N-PX20 | Omron Automa... | 0.0 $ | 1000 | SWITCH PLATE E-STOP INCRE... |
A16N-PX200E | Omron Automa... | 0.0 $ | 1000 | SWITCH PLATE E-STOP BLANK |
PX203J2 | US Sensor/Li... | 0.68 $ | 1000 | THERMISTOR NTC 20KOHM 389... |
A22N-PX20 | Omron Automa... | 0.0 $ | 1000 | INCREASE |
A22N-PX200 | Omron Automa... | 0.0 $ | 1000 | BLANK NAMEPLATE |
A22N-PX200E | Omron Automa... | 0.0 $ | 1000 | SPECIAL ENGRAVING |
PX20-BB2-R1000 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD |
PX20-FSLP-C2-1 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD |
PX20-FSR15N-B2 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD |
PX20-FSR15N-B2-1 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD |
PX20-FSRK-C2 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD |
PX20-FSRK-D2 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD |
PX20-PSR15N-E2 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD |
PX20-SSR15K-D2-2 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD |
PX20-SSR15K-D2-3 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD |
PX20-SSRK-C2 | JAE Electron... | 0.0 $ | 1000 | CONN PCMCIA CARD |
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE