PZU3.6B1,115

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	3.6V
Tolerance:	±2%
Power - Max:	310mW
Impedance (Max) (Zzt):	90 Ohms
Current - Reverse Leakage @ Vr:	5µA @ 1V
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 100mA
Operating Temperature:	-65°C ~ 150°C
Mounting Type:	Surface Mount
Package / Case:	SC-90, SOD-323F
Supplier Device Package:	SOD-323F
Base Part Number:	PZU3V6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PZU3.6B1,115 is a single Zener diode that has a wide range of applications in electronics and electrical engineering. It is a small, low-power device that can be used in a variety of applications such as voltage regulation, power supply regulation and voltage switching.The PZU3.6B1,115 diode has a 3.6 volt reverse breakdown voltage and a 115mA power rating. It has a maximum power dissipation at 25°C of 4.5W, with a junction temperature range of -65 to +175°C. The PZU3.6B1,115 has a Zener impedance of 20.5 ohms and a maximum operating temperature of 150°C.The PZU3.6B1,115 is used primarily as a voltage regulator. This is done by connecting the anode to the power source, and the cathode to the load. As the voltage of the power source increases, the zener diode will begin to conduct when the power supply voltage reaches the reverse breakdown voltage, thus regulating the voltage to the load. The PZU3.6B1,115 can also be used to protect circuits from voltages that are too high, such as over-voltage spikes.The PZU3.6B1,115 also has many applications in power switching. It can be used to control the flow of current by allowing only a certain amount of current to pass through the circuit when the power supply is turned on or off. The PZU3.6B1,115 can also be used as a voltage clamping device, where it will limit the voltage to a pre-determined level that enhances the circuit performance.The PZU3.6B1,115 diode is also used for surge protection and noise reduction. When used in surge protection, the diode will act as a limiting device, allowing only a certain amount of current to pass through within a set amount of time. This reduces the chance of voltage spikes from reaching sensitive system components.In addition to surge protection, the PZU3.6B1,115 diode can also be used for noise reduction by providing a low-resistance impedance which limits the amount of voltage that can reach the circuit. This reduces the chance of interference or power supply noise from reaching the system components.Overall, the PZU3.6B1,115 is a versatile single Zener diode used in a variety of applications such as voltage regulation, power supply regulation, voltage switching, surge protection, and noise reduction. It is a small, low-power device with a reverse breakdown voltage of 3.6V and a maximum power dissipation of 4.5W at 25°C. This makes the PZU3.6B1,115 an ideal choice for low-voltage, low-power applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description