PZU9.1B2,115

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PZU9.1B2 115 is a single zener diode that performs the function of regulating a flow of current in an electronic circuit. This diode is designed to maintain a minimal voltage drop while allowing current to pass through. Zener diodes are used in control circuits and shunting circuits, as a voltage reference, or to clip an incoming signal in an integrated circuit.

A “single” zener diode refers to one with a single junction, rather than two or more. The PZU9.1B2 115 is a single PN junction diode, with a breakdown voltage of 9.1 V and a maximum power rating of 115 mW. The diode is typically used as a voltage regulator in power supplies and battery chargers. It can also be used to protect integrated circuits and other electronic circuits from damaging voltages or currents.

The PZU9.1B2 115 diode is constructed from a semiconductor material, such as silicon or germanium, which is encased in an insulating material to protect it from damage. When the voltage across the diode reaches a certain value, known as the Zener voltage, electrons are able to move from the n-type material to the p-type material, creating an avalanche effect. This sharp increase in current causes the Zener voltage to remain at a constant level, resulting in a regulated voltage across the diode.

A diode facilitates the flow of current in one direction and blocks it in the opposite direction. This action is known as rectifying. The PZU9.1B2 115 diode can rectify a current of up to 6 A and provide a regulated voltage of 9.1 V. The diode’s maximum reverse leakage is 20 μA and its forward voltage drop is 3 V at 6 A. The diode also has a maximum reverse breakdown voltage of 9.1 V, and is designed to work within a -55°C to +150°C temperature range.

When using a PZU9.1B2 115 diode, it is important to ensure that the device is properly installed and secured. Installing the diode in the wrong direction can cause it to short-circuit, resulting in overheating and potential damage to the diode, the circuit, and other components. The diode should also be secured with thermal compound or heat-sinking material to ensure proper cooling when exposed to high temperatures.

The PZU9.1B2 115 is a single zener diode that can be used as a voltage regulator, a protection device, or a clipping component in many common electronic applications. Its unique construction and design make it ideal for maintaining a constant output voltage, while permitting high current flows and a wide operating temperature range. When using the PZU9.1B2 115, it is important to ensure proper installation and cooling to ensure long term reliability and performance of the diode.

The specific data is subject to PDF, and the above content is for reference