Q4006RH4TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Q4006RH4TP is a type of sensitive triac in TO-220AC package, and it is typically used in light dimmer applications. It is designed for off-line AC switching applications that require high frequency over-current protection. In addition, it has a high sensitivity gate rating, low control current, and low gate trigger current.

The Q4006RH4TP offers robustness of operation, high sensitivity current sensing. It also has the ability to turn off the output in the event of a line overvoltage or short circuit. The gate trigger current is variable, depending on the voltage on the gate. At higher temperatures, it can handle higher frequency signals than conventional triacs.

The Q4006RH4TP has a wide range of application fields. It is used in lighting and dimming applications, as it is sensitive to current and voltage changes, allowing for dimming feature on the lights. It is also used in power conversion, from DC to AC, in order to control the amount of AC current produced. It is also used in motor control applications, allowing for the control of speed and direction. Last but not least, it is used for temperature and speed control of HVAC systems.

The basic working principle of Q4006RH4TP is that it is a bidirectional switch with two stable states, low and high. When a small current is applied to the gate, the device switches from a low current state to a high current state, effectively allowing a current flow between the anode and the cathode. The device then switches back to the low current state when there is no gate voltage. This switching is cyclic, and is used in the application fields mentioned previously.

In conclusion, the Q4006RH4TP is a type of sensitive triac in TO-220AC package, and it has a wide range of application fields, from lighting and dimming to temperature control. Its basic working principle is that it is a bidirectional switch with two stable states, and it switches from low-current state to high-current state when a small current is applied to the gate. This switching is used in the various applications, providing a stable current flow between the anode and the cathode.

The specific data is subject to PDF, and the above content is for reference