Q8025R6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The development of high-power semiconductor control elements has enabled complicated systems like power converters operate at a fraction of the cost of analog systems. Further, thyristors – TRIACs, specifically the Q8025R6 allow for improved performance, reliability, efficiency and cost relative to other thyristors. They are commonly used in wide variety of industrial, commercial and residential applications such as high-power switching and industrial motor control, high-brightness LED lighting, and digital audio amplifier systems.

A thyristor, or TRIAC (Triode Transistor for Alternating Currents), is a three-terminal semiconductor switch with a primary use in AC (alternating current) power systems. A TRIAC-based system allows for the control of resistive, inductive and capacitive loads. It is usually employed to modify resulting power shifts – increasing, waving or even eliminating them – and thus, allowing for the safe operation of equipment with very narrow output ranges.

The standard Q8025R6 Thyristor provides a low voltage and high current output, resulting in a much higher power when compared to transistors with the same parameters. It consists of an anode and cathode, along with a gate to control the forward and reverse gate current. With an on-state voltage drop of 5-10V at 25 amperes, it can handle AC loads safely with a maximum rating of up to 400 volts and an operating temperature range of -40ºC to +85ºC. It is also designed with built-in protection circuits which can detect abnormal conditions such as overvoltage, overcurrent, over-temperature, and phase imbalance.

The Q8025R6 Thyristor may be a simple device but it’s quite sophisticated when it comes to its application fields. It can be used for controlling current in a wide array of applications. These include motor control, load control, synchronization and dynamic regulation of high-power AC loads. It is used in industrial plant automation, the DC net of public power plants, traction systems, UPS systems, frequency converters, induction furnace controls, PLC systems and HVAC systems.

The fundamental principle of operation of the Thyristor is as follows. It is comprised of a p-type and n-type semiconductors connected in a quadruple junction arrangement. When positive voltage is applied across the anode and cathode, current flows through this junction and it enters the gate. The result is the creation of a junction at the gate, which then holds the current until the gate is turned off. When the gate is turned off, the connection at the gate junction opens, the current is dispelled and the device no longer allows current to pass. This then allows for the control of the forward and reverse current by using the gate voltage.

The Q8025R6 Thyristor also provides several advantages over conventional transistor control systems. These include higher speed control, greater output power and flexibility, better electrical insulation, increased reliability and safety, improved mechanical strength, and higher efficiency. The Thyristor is also easily controlled by programmable digital systems, which provide an economic solution for high voltage and current applications. The device offers superior performance and cost effectiveness compared to other types of thyristors.

In conclusion, the Q8025R6 Thyristor is a device that offers a wide range of benefits for those using it in their high-power AC loads. It offers superior performance, greater flexibility, increased reliability and safety, higher speed control, better electrical insulation, improved mechanical strength, higher efficiency and cost effectiveness compared to other thyristors. Combining all these benefits yields an attractive solution to manage and control high power AC loads.

The specific data is subject to PDF, and the above content is for reference