QPPCCWBB10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

QPPCCWBB10 (Quad Primary Picosecond Counters with BitBus Interface) is a multi-function, front panel mounted device that is used as a master clock drive for industrial timing applications. Its main purpose is to accurately synchronize clock signals in long distance and other electronic control systems. Main applications include remote telemetry, industrial control, remote control and synchronization with other electronic systems.

QPPCCWBB10 has two independent clock outputs of 20 picoseconds each. The front panel consists of 9 buttons that are used to set and control the device. It has a dedicated connection, an RS-232C port for communications. There are two low-frequency (LF) outputs approximately every 100 microseconds and a high-frequency (HF) output about every 10 microseconds, both of which are programmable.

The synchronization of two devices connected to the QPPCCWBB10 is accomplished by using a bit-bus communication method. Bit-bus is a packet data exchange protocol that can be used to transfer data between two devices. The protocol requires that each device have a unique identification code, called a control word, which is transmitted along with the data. When the control word is successfully received, then the data is synchronized and a connection is established.

The QPPCCWBB10 has a self-calibration routine that is used to ensure accuracy and proper operation. This routine is initiated by pressing the self-calibration button on the front panel. During self-calibration, the device will measure the frequency of both the LF and HF output signals and compare them to a reference clock signal. If the measured frequency is within the allowable tolerance range, the device will consider the calibration successful. The device will also correctly set the relative length of each low-frequency control word transmitted.

Once the device has been successfully calibrated, it will be able to accurately generate a range of timing signals. It can generate a pulse for controlling time, a pulse for controlling distance, and a pulse for controlling speed. The length of these pulses can be programmed by the user and they can be used in a variety of industrial applications. For example, they can be used in control systems for controlling machinery, in control systems for operating robots, or in control systems for controlling the speed and direction of a motor vehicle.

Finally, the QPPCCWBB10 can also be used to generate an alarm signal when a pre-set condition is met. This can be used to alert a user to a malfunction or an abnormal condition. The alarm signal can be triggered in response to an input from another device, a timer, or an analog signal. The alarm signal is an output to an external device or it can be sent to a computer or PLC.

QPPCCWBB10 is a useful device for a variety of industrial applications. It is easy to set up and operate, and the self-calibration routine ensures its accurate performance. The ability to generate timing signals, control pulse lengths, and trigger alarms makes the device quite versatile and useful in many applications.

The specific data is subject to PDF, and the above content is for reference