Allicdata Part #: | QS3L384PAG8-ND |
Manufacturer Part#: |
QS3L384PAG8 |
Price: | $ 0.18 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | IDT, Integrated Device Technology Inc |
Short Description: | IC BUS SWITCH 10BIT HS 24-TSSOP |
More Detail: | Bus FET Exchange Switch 5 x 1:1 24-TSSOP |
DataSheet: | QS3L384PAG8 Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.16443 |
Series: | 3L |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | Bus FET Exchange Switch |
Circuit: | 5 x 1:1 |
Independent Circuits: | 2 |
Current - Output High, Low: | -- |
Voltage Supply Source: | Single Supply |
Voltage - Supply: | 4.75 V ~ 5.25 V |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Surface Mount |
Package / Case: | 24-TSSOP (0.173", 4.40mm Width) |
Supplier Device Package: | 24-TSSOP |
Base Part Number: | 3L384 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Logic-Signal Switches, Multiplexers, Decoders are electronic logic circuits that allow a number of logic inputs to select from a limited range of outputs. The QS3L384PAG8 is a type of Logic-Signal Switches, Multiplexers, Decoders. This particular device has a range of unique features and capabilities that make it an ideal choice for a variety of applications.
The QS3L384PAG8 has 8 output channels, each of which can be switched between two stable logic states. These states are referred to as the “low” position (logic 0) and the “high” position (logic 1). This makes the design particularly suitable for applications where both high and low logic states are required.
Each output can also be individually enabled or disabled. Control of these channels is accomplished through the use of the logic inputs. Logic 1 signals enable the output while logic 0 signals disable it. Furthermore, when a logic 1 signal is applied to the output enable input, all other outputs are disabled.
The device also has an output enable input. When this input is asserted, all outputs are enabled. This feature allows for easy control of multiple outputs at once.
The QS3L384PAG8 also features adjustable output drive strength. This allows the designer to reduce the current draw on the outputs when the output is in the high logic state. It also helps reduce switch bounce, which can cause erroneous logic signals to be generated.
The QS3L384PAG8 is a versatile device and can be used in a variety of applications. It can be used in digital logic circuits and is especially useful for decoding and multiplexing of parallel data bus signals. It can also be used for frequency control, timing control and error detection.
The QS3L384PAG8 is an ideal choice for applications that require switching between two stable logic states at high speed. In addition, it can be used to selectively enable and disable a number of outputs from a single logic input. The adjustable output drive strength makes it suitable for applications that require low power consumption and accurate switching. The device can also be used for parallel data bus decoding.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
QS3L384PAG | IDT, Integra... | 0.2 $ | 1000 | IC BUS SWITCH 10BIT HS 24... |
QS3L384QG | IDT, Integra... | -- | 1000 | IC BUS SWITCH 10BIT HS 24... |
QS3L384PAG8 | IDT, Integra... | 0.18 $ | 1000 | IC BUS SWITCH 10BIT HS 24... |
QS3L384QG8 | IDT, Integra... | 0.18 $ | 1000 | IC BUS EXCH SWITCH 10BIT ... |
Bus Switch ICs - Various Automotive 8-Ch...
IC BUS SW QUAD LV 16-QSOPBus Switch 1 x ...
IC MULTIPLEXER SINGLE 24SOICMultiplexer ...
IC 4BIT LATCH/4:16 DECODR 24-DIPDecoder/...
IC MULTIPLEXER 16:1 28-PLCCMultiplexer 1...
IC SWITCH BUS FET 10BIT 24-QSOPBus Switc...