R0.25D-0512/P-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are a key technology in a variety of power applications, including industrial, medical, and automotive, all of which require precise power delivery. Whether the energy needs to be delivered at a low voltage or a high voltage, with extreme efficiency or at the lowest possible cost, a DC-DC converter is the key to success for many power electronics systems. The R0.25D-0512/P-R is a highly efficient DC-DC converter module, widely used in industrial applications. This article will explain the various applications for the R0.25D-0512/P-R and the working principles behind it.

The R0.25D-0512/P-R is a high frequency DC-DC converter module, designed to deliver reliable and stable power in a variety of applications. It can be used for motor drives, power supplies, DC-DC converters, and other power applications. The R0.25D-0512/P-R is rated at 25A continuous and 50A peak current output with ground fault protection and at least 500W of power. It offers a very high load and line regulation capability with a maximum no-load power consumption of 39W. The module also has an input voltage range of 9V–18V, an output voltage range of 0.8V–17V, and a full-load efficiency of up to 93%.

The R0.25D-0512/P-R uses advanced high frequency switching technology combined with synchronous rectification, PFC, and other digital control technologies to achieve high efficiency and other key power conversion performance parameters. This makes the module suitable for use in many commercial and industrial applications, including industrial automation, electric vehicle charging, solar power inverters, and medical power systems. Additionally, the R0.25D-0512/P-R is highly reliable, with a load life of more than 150,000 hours and a start-up time of less than 500ms, without any need for mechanical cooling.

The working principle of the R0.25D-0512/P-R is based on the power conversion process, which converts the input voltage to a precise output voltage. This process is based on a high-frequency “switching” across the DC-DC converter module, which repeatedly turns the input voltage (Vin) on and off in a fixed frequency and at a certain duty cycle. Based on this, the output voltage (Vout) is determined. The switching frequency of the module is controlled by a digital controller, and can be adjusted depending on the application. A high frequency MOSFET is used to drive the switching process, while the synchronous rectification process helps to reduce switching losses and automatically improve the efficiency of the power system.

The R0.25D-0512/P-R is a highly efficient DC-DC converter module that offers a wide range of applications, as well as an excellent performance across a variety of parameters. Its combination of advanced high frequency technology, digital control, and synchronous rectification makes the module suitable for a range of industrial, medical, and automotive applications. The working principle of the R0.25D-0512/P-R is based on the power conversion process, which accurately converts an input voltage into a precise output voltage, using a combination of high-frequency switching and synchronous rectification.

The specific data is subject to PDF, and the above content is for reference