R0.25D10-0509/P-R

Series:	ECONOLINE R0.25D
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	2
Voltage - Input (Min):	4.5V
Voltage - Input (Max):	5.5V
Voltage - Output 1:	9V
Voltage - Output 2:	-9V
Voltage - Output 3:	--
Current - Output (Max):	14mA, 14mA
Power (Watts):	250mW
Voltage - Isolation:	1kV
Applications:	ITE (Commercial)
Features:	SCP
Operating Temperature:	-40°C ~ 100°C
Efficiency:	60 ~ 70%
Mounting Type:	Surface Mount
Package / Case:	10-SMD Module
Size / Dimension:	0.60" L x 0.42" W x 0.28" H (15.2mm x 10.7mm x 7.0mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

A R0.25D10-0509/P-R DC DC Converters is a simple, cost-effective method of converting DC to DC without the need of a variable transformer. This type of converter uses a diode and a capacitor, in combination with a rectified power source and an inductor, to convert a regulated AC voltage and current to a steady, regulated DC voltage. The process is relatively simple and efficient, with power losses only reflecting those of the components involved in the conversion.

Application Field

R0.25D10-0509/P-R DC DC Converters are commonly used in many applications requiring a constant, regulated DC voltage. These convertes are used in low-power applications, such as LED lighting, as well as in high-power applications, such as UPS systems, electric vehicles, and portable electronics. They can also be used to convert AC into DC, or DC into AC.In addition to direct power conversion, these devices can be used for power conditioning and voltage stabilization. This type of converter is particularly suitable for applications where low electrical ripple or noise is critical. It can also provide the reliable performance needed in medical and communications equipment, as well as in industrial and consumer applications.

Working Principle

The main components of a R0.25D10-0509/P-R DC DC Converters are the rectified power source, an inductor for storing energy, a diode for controlling the current flow, and a capacitor for smoothing out the voltage ripple. When AC voltage is applied to the converter, the diode works to control the current flow and keep it constant. The rectified power source supplies the voltage, which is then stored in the inductor and released when needed. The capacitor is used to reduce ripple and provide a constant voltage output.The current control is the key to the performance of this type of converter. By allowing the inductor to store energy, the current is kept to a minimum and the power loss is reduced. This also helps to improve the reliability of the system and to extend the life of the components, since they will not be exposed to high peak currents.

Conclusion

R0.25D10-0509/P-R DC DC Converters are perfect for applications requiring a regulated DC voltage. These devices are simple to install and use, and they provide reliable performance. The main components, the rectified power source, the inductor, the diode and the capacitor, work together to ensure that the output voltage is regulated and that the current is controlled. This type of converter is suitable for low- and high-power applications, as well as for power conditioning and voltage stabilization.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description