R181VQ60.40.01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Single Conductor Cables (Hook-Up Wire) are used for a wide range of low-voltage applications, such as signal transmission, alarm systems, automotive electronics, medical devices, and in industrial and commercial wiring projects. The R181VQ60.40.01 is a special type of single conductor cable suited for these applications.

Construction

The R181VQ60.40.01 is composed of stranded bare copper and has a polyvinylchloride (PVC) insulation. The wire is UL Style 1015 rated and is suitable for use in temperatures between -40°C and 105°C. It has an impedance of 70 Ω/km and a rated voltage of 600V. The cable is available in sizes ranging from 18AWG to 30AWG and is resistant to flame and oil. The wire is UL and cUL recognized.

Applications

The R181VQ60.40.01 is often used in commercial and industrial applications where wiring is exposed or in areas where vibration or mechanical damage is likely to occur. This type of cable is often used for light-duty power and control wiring. It is well suited for wiring applications in low-voltage systems equipped with surge protection, as well as applications that require an insulated shield. The cable is also suitable for general wiring including interconnecting bare control lines.

Working Principle

The working principle of the R181VQ60.40.01 is relatively simple. The wire is designed to transmit electrical signals from one device to another. The conductors in the cable are typically insulated from each other, allowing the signal to travel freely without interference. In addition, the PVC insulation acts as a barrier to prevent the transmission of electrical noise from one device to another. The copper conductors are also configured to provide a reliable connection between devices.

Maintenance

The R181VQ60.40.01 requires minimal maintenance. The insulation should be inspected periodically to ensure that it remains intact and free of any damage. Any loose strands should be cut and removed, and the connection should be checked for any signs of deterioration. If the insulation is found to be damaged, the wire should be replaced with a new length. Additionally, any splices or connectors used with the wire should remain tight and not have any signs of corrosion or deterioration.

Conclusion

The R181VQ60.40.01 is a single conductor cable with a polyvinylchloride insulation for use in low-voltage applications. This type of cable is suitable for commercial and industrial uses, as well as applications that require an insulated shield or flame and oil resistance. Additionally, the cable has a 70 Ω/km impedance, allowing it to transmit electrical signals without interference. The cable is UL and cUL recognized, and minimal maintenance is needed for it to remain in good working condition.

The specific data is subject to PDF, and the above content is for reference