R2DDF-100P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The R2DDF-100P is an electronic control device used to control motor drive systems. It is a two-phase stepper motor/half-bridge driver, and is designed to control both two-phase stepper motors and half-bridge driver drives which have been phased out in many applications due to their low efficiency and high cost. The R2DDF-100P is used in a variety of applications, from industrial automation to 3D printing.

The R2DDF-100P is able to provide a speed-controlled driving environment for two-phase stepper motors, half-bridge driver drives, and other suitable electric motor drives. It can achieve smooth, low-noise operation, with a programmable frequency range of 0.01 Hz to 5.3 kHz and speed control range of 1/5 to 5000 rpm. The forward and reverse rotation control signal is built in to enable variable speed control of the motor without the need for an external controller.

The R2DDF-100P is designed to work with single, two-phase, and three-phase stepping motor drives. It supports the desired operation mode of motor control: micro-step, full step, or half-step. With micro-step and full-step operation modes, the motor can be fine tuned to achieve ultra smooth, predictable performance. The half-step operation mode is useful for quick acceleration and deceleration, which can be useful in certain applications.

The R2DDF-100P also features integrated on-board protection features that prevent accidental damage to the motor or electronics. This makes the R2DDF-100P perfect for applications in critical environments, such as automobile assembly, where a high degree of protection is necessary.

The working principle of the R2DDF-100P is based on the Pulse Width Modulation (PWM) technique. This technique is used to achieve highly precise motor speed control by modulating the pulse width of each phase with variable duty-cycle ratios. When applied to stepper motors, for example, the ratio controls the step angle of the motor with high accuracy, helping to ensure smooth, uninterrupted motion. The PWM technique also allows the device to control the motor oscillations at high frequency. This helps to improve the positional accuracy of the motor.

In addition to the PWM technique, the R2DDF-100P also features a dynamic current limiting and variable decay function. The dynamic current limiting feature ensures that the maximum current used by the R2DDF-100P does not exceed the preset limit, helping to protect the device from any sudden over-current conditions. The variable decay feature, on the other hand, allows for the smooth stopping of the motor, even under full-load conditions, without fear of stall or over-current conditions.

In short, the R2DDF-100P is a versatile, highly precise electronic device that can be used to control a variety of two-phase stepper motor and half-bridge driver drives. It is suitable for a variety of applications, from industrial automation to 3D printing. Its working principle is based on the PWM technique, and it features integrated on-board protection features that help to protect the device from over-current conditions. The R2DDF-100P is the perfect choice for applications that require precise, smooth operation with high efficiency and low cost.

The specific data is subject to PDF, and the above content is for reference