R2S12-053.3/H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters have been used in a variety of applications for many years. They are used in applications that require either the conversion of one DC voltage to another, or the isolation of one DC voltage from another. The R2S12-053.3/H is a type of DC to DC converter that is designed to aid with these applications.

The R2S12-053.3/H is a step-down converter, meaning it takes an input DC voltage and provides an output voltage that is lower than the input. It is a switch-mode converter, meaning that instead of decreasing the output voltage through resistive loading, a switch is used to control the output voltage. This provides improved performance by offering a high efficiency, low ripple, and low noise. Additionally, the converter is over-voltage, short-circuit and overload protected.

The R2S12-053.3/H provides an input voltage range of 3 to 36 VDC and a regulated output voltage of 12 VDC. The output current is adjustable from 0.2 to 3 A. The power efficiency is typically 80-90 %, and the line regulation is 0.01 %. The typical no load input current is lower than 8 mA, and the output ripple is around 30 mV. The maximum operating temperature of the converter is 70 degrees Celsius.

The working principles of the R2S12-053.3/H DC to DC converter involve the use of switches, inductors, and capacitors. The input power is connected to the input terminals on the converter and a switch is used to control the operation of the converter. When the switch is connected to the input, current passes through an inductor, which stores energy. The stored energy is then transferred to the output through another switch and capacitor. This process is repeated continuously to maintain the output voltage at the desired level.

The R2S12-053.3/H is mainly used in industrial and commercial applications. It is common in electronic systems and circuits that require the conversion of power from one voltage to another. Common applications are AC/DC power adapters, LED lighting systems, robotic systems, and control systems.

In conclusion, the R2S12-053.3/H is a DC to DC converter that is designed to provide conversion and isolation of DC voltages. It has an input voltage range of 3 to 36 VDC and a regulated output voltage of 12 VDC. The working principle of the converter involves the use of switches, inductors, and capacitors. Its main applications are in AC/DC power adapters, LED lighting systems, robotic systems, and control systems.

The specific data is subject to PDF, and the above content is for reference