Allicdata Part #: | R3880-ND |
Manufacturer Part#: |
R3880 |
Price: | $ 20.79 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Microsemi Corporation |
Short Description: | RECTIFIER |
More Detail: | Diode |
DataSheet: | R3880 Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 18.70850 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A rectifier is an electronic device that converts alternating current (AC) electricity into direct current (DC). The most common type of rectifier is the diode, which uses a P-N junction diode to convert AC into pulsating DC. The R3880 is a single-phase, full-wave bridge rectifier with a 20A rating and a forward voltage drop of 41V. It is made of four ultrafast, power rectifying diodes with a high-efficiency, low-loss design, making it ideal for high current, high frequency applications.The R3880 is designed for use in AC-DC power supplies, power rectification and charging systems, such as batteries and capacitive energy storage, ripple voltage smoothing, and reverse current and overvoltage protection. It can also be used in HID lamp ballasts and in automotive applications, such as automotive switches and airbags.The R3880’s working principle is based on PN junction diode properties. In a PN junction diode, when a positive voltage is applied to the anode, the junction is considered forward-biased and a current will flow. When the voltage is reversed and the anode is negative, the junction is said to be reverse-biased, and no current will flow.For the R3880 to work, four diodes, each rated at 20A, are installed in a full-wave bridge rectifier configuration. Input AC current is applied to the two outer terminals, anode and cathode. When the alternating current is sent through the diodes, in each half-cycle the diode nearest the source voltage is forward-biased and conducts current. The other three diodes are reverse-biased and no current is conducted through them. This occurs for both half-cycle of the AC waveform, since the voltage polarity is alternating.At the output of the bridge rectifier, DC current is produced. During the positive half-cycle of input AC waveform, one diode is forward-biased and conducts current through the load, while the other three diodes are reverse-biased and don’t conduct current. During the negative half-cycle of the AC waveform, the other diode will be forward-biased and conducts current to the load, while the other three diodes are reverse-biased and don’t conduct current. This continuous process provides a steady and unidirectional DC current.The R3880 can operate at relatively high frequencies of up to 200kHz or higher. This makes it suitable for applications such as high frequency switched mode power supplies, where high speed switching is required with low levels of losses. The R3880 also has a low forward voltage drop and a high operating temperature range, up to 175°C.In summary, the R3880 is a 20A rated, full-wave bridge rectifier that is ideal for applications requiring high power, high frequency and low losses. It works by utilizing four ultrafast, power rectifying diodes in a full-wave bridge rectifier configuration that converts alternating current electricity into direct current with a low forward voltage drop.
The specific data is subject to PDF, and the above content is for reference
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...