R5F1058AALA#W0

Program Memory Size:	16KB (16K x 8)
Supplier Device Package:	25-LGA (3x3)
Package / Case:	25-WFLGA
Operating Temperature:	-40°C ~ 85°C (TA)
Oscillator Type:	Internal
Data Converters:	A/D 11x10b, D/A 2x8b
Voltage - Supply (Vcc/Vdd):	1.6 V ~ 5.5 V
RAM Size:	1.5K x 8
EEPROM Size:	2K x 8
Program Memory Type:	FLASH
Series:	RL78/G11
Number of I/O:	21
Peripherals:	LVD, POR, WDT
Connectivity:	CSI, I²C, UART/USART
Speed:	24MHz
Core Size:	16-Bit
Core Processor:	RL78
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The R5F1058AALA#W0 microcontroller is designed to provide a flexible and powerful solution for embedded applications. It features an eight-bit single-cycle RISC architecture, which enables it to be used as a core processor for a wide range of designs. This article will discuss the application field and working principle of the R5F1058AALA#W0 microcontroller.

Application Field

The R5F1058AALA#W0 microcontroller is an ideal choice for embedded applications due to its efficient architecture and high-level of integration. It can be used for a wide range of applications including digital signal processing (DSP), embedded multimedia applications, automotive systems, industrial automation, robotics, medical electronics and consumer electronics. The core of the R5F1058AALA#W0 microcontroller is its eight-bit single-cycle RISC architecture which supports instructions such as load, store, compare, and move. These instructions can be used to reduce program code size and memory requirements. The R5F1058AALA#W0 also integrates a dedicated 16/32-bit multiplier, advanced interrupt handling capabilities, and an on-chip timer for real-time applications. The R5F1058AALA#W0 microcontroller also features a range of peripherals for embedded applications. These include two UARTs, three SIOAs, an on-chip LCD controller, and one 8-bit PIO controller. The on-chip LCD controller allows for direct connection to a number of LCDs, and the 8-bit PIO controller provides flexible IO control of devices such as LEDs, switches and actuators.

Working Principle

The R5F1058AALA#W0 microcontroller is based on an eight-bit single-cycle RISC architecture. This architecture enables the device to execute instructions in a single cycle and reduces code size and memory requirements. The processor core contains a set of instruction registers, an instruction decoder, an arithmetic logic unit (ALU), an accumulator, a program counter and a few special-purpose registers. The instruction set of the R5F1058AALA#W0 consists of two types of instructions, Load/Store and Compare/Move. The Load/Store instructions enable data to be loaded from or stored to memory or registers, while the Compare/Move instructions are used to compare values or move data from one location to another. The ALU is used to perform calculations, and the accumulator is used to store intermediate results. The R5F1058AALA#W0 also contains a timer and interrupt controller which can be used for real-time applications. The timer can be programmed to generate a periodic interrupt to the processor core, and the interrupt controller allows multiple external interrupts to be serviced by the processor.

Conclusion

The R5F1058AALA#W0 microcontroller offers an efficient, single-cycle RISC architecture, ideal for embedded applications. Its integrated peripherals, such as UARTs, SIOAs, an LCD controller and a PIO controller, enable it to be used for a wide range of applications. The processor has an instruction set consisting of two types of instructions, and the timer and interrupt controller can be used for real-time applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description