RAVF164DFT75R0 Resistors

Number of Pins:	8
Height - Seated (Max):	0.024" (0.60mm)
Size / Dimension:	0.126" L x 0.063" W (3.20mm x 1.60mm)
Supplier Device Package:	--
Package / Case:	1206 (3216 Metric), Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	Automotive AEC-Q200
Operating Temperature:	-55°C ~ 155°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	62.5mW
Series:	RAVF
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±1%
Resistance (Ohms):	75
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RAVF164DFT75R0 is the designation for a resistor network array manufactured by Redefine AB. The network consists of 14 resistors of various value, arranged in a series-parallel configuration. This array is used to mount surface-mount resistors onto printed circuit boards (PCBs), and is designed to save space and reduce cost. The RAVF164DFT75R0 can be used in a wide range of applications, most notably in telecommunications and consumer electronic devices.The RAVF164DFT75R0 is assembled using four basic elements: a paper tape, two support strips, and an FR-4 (flame retardant) substrate. The four elements are then connected using conductive silver epoxy. The top layer of the assembly consists of a sheet of tape with the resistors arranged in a particular pattern. This layer is then covered with a coating of liquid epoxy, which helps to anchor the resistors in place and to insulate them from each other. The second layer consists of two support strips, which are fixed to the paper tape and the epoxy. The strips ensure that the structure remains stable, and provide additional insulation between the components. The bottom layer is an FR-4 substrate which provides a ground path for the array, preventing interference and static buildup.Once assembled, the RAVF164DFT75R0 operates based on its arrangement and size. The resistors are arranged in a series-parallel configuration, which results in a network with a certain resistance level. The resistance depends on the values of the individual resistors, and the length of the traces connecting them. The size of the array is also a factor, as the resistors must fit within a certain area.In most applications, this network is used to control the flow of current. By connecting it to a current-limiting device, the system can be configured to allow only a certain amount of current to flow. This can be used to prevent damage to components or to adjust the current draw on a circuit during operation. It can also be used to detect when a fault has occurred in a circuit, as a sudden change in the resistors’ resistance will result in a change in current.As well as this, the RAVF164DFT75R0 can also be used to ride out voltage spikes or other fluctuations in the power supply. By connecting the resistors in parallel, a certain level of resistance can be maintained, keeping power consumption consistently low. This also helps protect sensitive components, as sudden spikes in voltage can damage delicate parts.The RAVF164DFT75R0 is a versatile component, capable of providing a range of highly useful features in a variety of applications. Its simple assembly, low cost, and small form factor make it an ideal choice for a wide range of telecommunications and consumer electronics devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description