RC3007B6TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are used to prevent electrical interference from entering or leaving a device or system. They are usually made from a combination of inductors (L) and capacitors (C), and can either pass current freely (low-pass filter) or block current (high-pass filter). The RC3007B6TR13 is an example of an EMI/RFI filter, utilizing a RC network with specific characteristics.

The RC3007B6TR13 is a high-pass filter that is frequency-dependent and exhibits a 3-dB roll-off at 6.0 MHz. It is designed for use in applications where it is necessary to remove low-frequency, low-amplitude noise from a signal such as when audio or data signals pass through cables connecting different systems. The RC3007B6TR13 is rated up to 18V and can pass up to 500mA.

The RC3007B6TR13 filter works by using capacitors in combination with resistors to create a low-impedance environment at the desired frequency. The capacitors and resistors are connected in series, with the capacitors acting as high-pass filters and the resistors acting as low-pass filters. The filter attenuates noise at frequencies below the desired frequency (6.0 MHz for the RC3007B6TR13) while allowing signals at or above the desired frequency to pass freely. At the desired frequency, the signal passes through the filter relatively unaffected.

The RC3007B6TR13 has a wide range of applications, including noise suppression in audio and video cables, wireless communications, and medical imaging systems. It can be used to reduce the background noise in an audio signal, filter out high-frequency interference (EMI) from a system, or prevent signals from entering or exiting a shielded enclosure. The RC3007B6TR13 is also useful for preventing signal distortion caused by external noise.

In conclusion, the RC3007B6TR13 is a high-pass filter with a 3-dB roll-off at 6.0 MHz, designed for use in applications requiring the removal of low-frequency, low-amplitude noise. The filter is rated up to 18V and can pass up to 500mA. It is capable of reducing EMI and preventing signal distortion caused by external noise, and can be used for noise suppression in audio and video cables, wireless communications, and medical imaging systems.

The specific data is subject to PDF, and the above content is for reference