RCLAMP0544M.TBT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppression) Diode is a major component to protect systems, circuits, and components against overvoltage transients, also known as surges or ESD (Electrostatic Discharge). The primary purpose of TVS is to absorb these transient overvoltages and divert or transfer the transient electrical surge energy to ground thus eliminating damage to sensitive device such as semiconductor. The TVS diodes are designed with two purpose, one is to protect semiconductor and other is to protect sensitive devices against overvoltages.

The RCLAMP0544M.TBT, a low capacitance bidirectional ESD protection diode array, is designed to protect two I/O ports on a board from any ESD threats. This device offers extremely low leakage current and excellent ESD protection of up to 4kV contact discharge. With its low capacitance typically not exceeding 0.5pF at 4V, it is ideal for protecting data lines with low operating voltages or high signaling frequency.

The RCLAMP0544M.TBT has two pins, anode, and cathode. The anode side is connected to ground and the cathode side is connected via series resistor to the protected port. When no transient is present, the device behaves like an open circuit. However, in the event of an ESD transient, the diode will reduce the voltage below the breakdown voltage, typically 16V, when the transient is over, the device returns to its high impedance state.

When the ESD strikes one pin, the other pin of the diode, which is the anode pin, will be pulled down to ground by the internal diode. This will cause an inverting action. Hence the anode pin exhibits the opposite polarity potential compared to the ESD-injected pin. It is these back-to-back, two-terminal diode arrays that form a clamp array which protect both of the I/O ports.

The RCLAMP0544M.TBT is designed to offer very low clamping voltage between 12V and 16V. This ensures a very low parasitic capacitance to reduce signal insertion loss and ringing. It is also built with Zener diodes to provide the desired clamping voltage and leakage current. The Zeners also contribute to the low capacitance of the device, which helps protect high-speed data lines such as DDR3 and DDR4 SDRAM, HDMI, and USB ports, as well as high frequency antenna/RF ports.

In addition, the RCLAMP0544M.TBT is also protected against negative transients called an EFT (Electrical Fast Transient) which can occur as a result of a failed motor or a faulty power supply. An EFT is a pulse of high voltage that is sustained for a few microseconds. The low capacitance of the RCLAMP0544M.TBT helps to reduce the duration and impact of the transient, thus protecting the device and its peripheral circuitry.

The RCLAMP0544M.TBT can be used in a variety of applications including mobile phone, digital cameras, laptops, 3G/4G wireless devices, USB ports, HDMI ports, and more. It is an ideal choice for protecting any kind of device against transients due to its low capacitance and low clamping voltage. With its built-in Zener diodes, it can also protect against negative transients such as EFTs. All in all, the RCLAMP0544M.TBT is a reliable and effective solution for protecting against overvoltages, ESD, and EFTs.

The specific data is subject to PDF, and the above content is for reference