RCNL25R0F02R0KTT Filters |
|
Allicdata Part #: | 1284-1331-2-ND |
Manufacturer Part#: |
RCNL25R0F02R0KTT |
Price: | $ 1.55 |
Product Category: | Filters |
Manufacturer: | American Technical Ceramics |
Short Description: | FILTER RC 25 OHM/2PF SMD |
More Detail: | RC EMI Filter R = 25 Ohms, C = 2pF 0402 (1005 ... |
DataSheet: | RCNL25R0F02R0KTT Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 1.40741 |
2000 +: | $ 1.38507 |
Values: | R = 25 Ohms, C = 2pF |
Height: | 0.024" (0.60mm) |
Size / Dimension: | 0.039" L x 0.020" W (1.00mm x 0.50mm) |
Package / Case: | 0402 (1005 Metric) |
Mounting Type: | Surface Mount |
Voltage - Rated: | -- |
Applications: | General Purpose |
Operating Temperature: | -55°C ~ 125°C |
ESD Protection: | No |
Series: | RCN |
Resistance - Channel (Ohms): | 25 |
Attenuation Value: | -- |
Center / Cutoff Frequency: | -- |
Technology: | RC |
Filter Order: | -- |
Type: | -- |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RCNL25R0F02R0KTT is a very popular EMI/RFI filter for a variety of commercial applications. It is used to eliminate noise generated by electronic components such as motors, power supplies, and switching circuits. Its popularity is due to its ability to effectively screen out both common-mode and differential-mode signals that are often responsible for EMI/RFI interference.
This filter has a typical performance rating of up to 100 dB in suppression of common and differential mode noise, as well as providing wide-bandwidth rejection from both low- and high-frequency sources. It is capable of handling input currents up to 800 mA and input voltages up to 16 VDC. This provides the filter with the ability to reduce vast arrays of electrical disturbances and also significantly increase signal integrity.
The RCNL25R0F02R0KTT employs a combination of inductors, capacitors, and resistors, arranged into an impedance-matching network forming a high-performance filter circuit. This carefully designed network allows the filter to effectively block out undesired noise frequencies that cause EMI/RFI interference, while still allowing the desired signal to pass through.
When placed between an EMI/RFI source and a receiver, this filter behaves as an impedance-matching automatic switch. It has the ability to sense incoming EMI/RFI frequencies, and adjust the impedance accordingly. Since the impedance is adjusted according to the incoming signal, only signals that are within the frequency range of 0.5 Hz to 30 MHz are allowed to pass through the filter. This makes the RCNL25R0F02R0KTT ideal for applications where wide bandwidth and high-frequency noise of these frequency ranges need to be filtered out.
The RCNL25R0F02R0KTT filter has a wide variety of application areas, most notably within the telecommunications, medical diagnostic, and automotive industries. Within the telecommunications industry, this filter has been used to suppress noise interference in mobile phone systems, internet routers, and satellite receivers. The RCNL25R0F02R0KTT also has applications within the medical field, such as being used as a noise suppressor in defibrillators and monitors. Finally, within the automotive industry, this filter is used in a wide variety of applications including electric batteries, turbochargers, and electric engine control units.
In summary, the RCNL25R0F02R0KTT EMI/RFI filter is a highly effective filter capable of blocking out common-mode and differential-mode noise in a variety of applications. This filter can handle input currents up to 800 mA and input voltages up to 16 VDC, while providing up to 100 dB of noise attenuation. The RCNL25R0F02R0KTT is able to sense incoming EMI/RFI frequencies, adjusting the impedance accordingly to suppress undesired signals at frequencies between 0.5 Hz to 30 MHz. This filter is highly suited for telecommunications, medical, and automotive applications, and has been used widely in these industries.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RCNL25R0F02R0KTT | American Tec... | 1.55 $ | 1000 | FILTER RC 25 OHM/2PF SMDR... |
RCNL25R0F01R0KTT | American Tec... | 1.55 $ | 1000 | FILTER RC 25 OHM/1PF SMDR... |
RCNL25R0F00R5KTT | American Tec... | 1.51 $ | 1000 | FILTER RC 25 OHM/0.5PF SM... |
RCNL25R0F11R0KTT | American Tec... | 1.55 $ | 1000 | FILTER RC 25 OHM/11PF SMD... |
RCNL25R0F04R5KTT | American Tec... | 1.55 $ | 1000 | FILTER RC 25 OHM/4.5PF SM... |
RCNL25R0F06R5KTT | American Tec... | 1.55 $ | 1000 | FILTER RC 25 OHM/6.5PF SM... |
RCNL25R0F03R0KTT | American Tec... | 1.55 $ | 1000 | FILTER RC 25 OHM/3PF SMDR... |
RCNL25R0F05R0KTT | American Tec... | 1.55 $ | 1000 | FILTER RC 25 OHM/5PF SMDR... |
FILTER LC HIGH FREQ 100PF 0805LC (T-Type...
FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...
FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...
FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...
FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...
FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...