RD5122-10-6M0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common mode chokes are components used to reduce electromagnetic interference (EMI) in circuits. They are electrical filters that limit common-mode currents in circuits, usually at radio frequencies, and provide a low-impedance connection to the ground for the intended signal frequency(s) and minimizes the common-mode current flow. The RD5122-10-6M0 is one such common mode choke that is commonly used for EMI suppression.

The RD5122-10-6M0 is commonly used in power supplies, audio systems, and other applications that require RF filtering of signals. It is an axial lead filter, which consists of two windings that are wound in opposite directions on ferrite material. The two windings have a low mutual inductance, which reduces the correlation between output signals passing through the chokes. This allows the choke to reduce EMI effectively.

The RD5122-10-6M0 also has a high impedance compared to other common mode chokes due its high inductance-to-resistance ratio, which typically ranges from 1000:1 to 15000:1. This high impedance limits the amount of current that can flow through the choke, preventing signals from interfering with other components connected to the same circuit.

In terms of its application field, the RD5122-10-6M0 is generally used in DC motors and AC power supplies where it can more effectively suppress common-mode interference from the DC motor. Similarly, it is also used in audio systems where it can reduce EMI from the power supply to the speaker circuit.

In terms of its working principle, the RD5122-10-6M0 uses two windings that are wound in opposite directions. When an alternating current signal passes through the two windings, a magnetic field is created that induces an opposing current in each winding. This opposing current works to impede the signal’s flow, dampening any common-mode interference. At the same time, the choke filters out any noise or interference that could cause circuit damage or interference with other components.

In conclusion, the RD5122-10-6M0 is a common mode choke typically used in power supplies, audio systems, and other applications where EMI suppression is needed. It is easy to use, has a high impedance, and reduces the amount of interference from the signal. Although the exact mechanisms of how it suppresses EMI is complex, it is clear that the RD5122-10-6M0 can be an effective solution for reducing EMI in a variety of different applications.

The specific data is subject to PDF, and the above content is for reference