RD5122-6-9M6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A common mode choke is an electromagnetic component used to reduce common-mode noise and differential-mode noise in electronic circuits. The RD5122-6-9M6 common mode choke is designed to reduce noise in high frequency switching applications where up to 12A is required. It is primarily used in automotive electronics, power supplies, switching power supplies and other high power switching applications.

The RD5122-6-9M6 common mode choke consists of two separate windings made of aluminum wire that are wound on a ferrite toroid core. The windings are placed in close proximity to ensure optimal inductance. The two windings (the primary and the secondary) are connected such that the leakage flux does not leave the core. This helps to maximize the effectiveness of the device in reducing both differential-mode and common-mode noise.

The working principle of the RD5122-6-9M6 common mode choke is quite straightforward. It works by blocking high-frequency signals from passing through its windings and allowing low-frequency signals to pass through. This helps to reduce the noise and EMI that may otherwise be present in the system. The choke is also capable of suppressing both common-mode and differential-mode noise.

Due to its high power rating and low leakage, the RD5122-6-9M6 common mode choke is well-suited for a wide variety of applications. It is particularly useful for filtering high-frequency noise in circuits that require a high current draw. It is also very effective in reducing EMI in systems with high switching frequencies. The device is also useful for filtering noise in data and communication lines, particularly for digital circuits. Finally, it is also suitable for use in radio frequency (RF) signal transmission, such as cellular networks and Wi-Fi transmitters.

In conclusion, the RD5122-6-9M6 common mode choke is a useful device for reducing both common-mode and differential-mode noise in a wide variety of applications. Its low leakage and high power rating make it suitable for use in power electronic systems, such as automotive electronics and power supplies. It is also effective for reducing EMI in high-switching frequency systems, as well as for filtering noise in data and communication lines. Finally, its ability to suppress high-frequency noise also makes it suitable for use in RF signal transmission.

The specific data is subject to PDF, and the above content is for reference