RDAF-15SE-LNA(50)

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The RDAF-15SE-LNA (50) is a versatile broadband low noise amplifier (LNA) designed for a wide variety of applications requiring a high performance gain block in a small form factor. The amplifier consists of an integrated circuit (IC) containing up to 16 individual gain stages, each tuned to provide optimal noise figure performance across a wide range of frequencies. Typically, the gain is in excess of 14dB across the full frequency range of 450MHz to 10GHz with an average noise figure below 1.5dB.The RDAF-15SE-LNA (50) is most commonly used in RF receiver and test equipment applications where the incoming signal is typically low and the desired output signal needs to be amplified to a usable level. Applications such as satellite communications, remote sensing, radar systems, and wireless backhaul systems all require LNAs to amplify the weak incoming signal and improve signal to noise ratio. The amplifier can also be used as a source of gain for high fidelity audio or radio frequency applications.The RDAF-15SE-LNA (50) is designed to provide a high performance gain solution in a compact form factor, with a low noise figure and high linearity. The gain stages are tuned to provide a high gain response across a broad frequency range with a wide operating bandwidth and low noise figure. The individual gain stages are connected in series and form an effective composite amplifier, resulting in a high gain over a wide range of frequencies with a low noise figure.The working principle of the RDAF-15SE-LNA (50) is based on the concept of a series of several cascaded amplifiers, each with a different gain and noise figure. The multiple gain stages provide a more linear response, and a higher signal to noise ratio than would be possible with a single amplifying stage. The amplifier is driven from a low impedance source, typically the RF input signal from an antenna or cable. The input signal is amplified by the initial gain stage and then cascaded through the gain stages, each with its own gain and noise figure. The gain and noise contribution from each stage is additive, helping to increase the overall gain and reduce the noise figure.The amplifier also has the ability to compensate for changes in the frequency response at high gain levels, allowing it to better adapt to the needs of a particular application. Additionally, the amplifier has the ability to attenuate thin antenna signals, as well as accelerate signal processing times.The use of the RDAF-15SE-LNA (50) has become popular in a variety of applications due to its high gain, low noise figure, and small size. Its low insertion loss and wide bandwidth make it a valuable choice for many applications including satellite communications, remote sensing, radar systems, and wireless backhaul systems. The amplifier is also used in high fidelity audio and radio frequency applications providing a wide range of gain and system optimization. It is well suited for use in both residential and commercial settings and is often included in applications such as mobile phones, broadcasting, satellite television, and automotive applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description