Allicdata Part #: | READ2302GSP#GC0-ND |
Manufacturer Part#: |
READ2302GSP#GC0 |
Price: | $ 0.25 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Renesas Electronics America |
Short Description: | IC OPAMP 8TSSOP |
More Detail: | CMOS Amplifier 2 Circuit |
DataSheet: | READ2302GSP#GC0 Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.22037 |
12500 +: | $ 0.21208 |
25000 +: | $ 0.20546 |
62500 +: | $ 0.19883 |
Series: | -- |
Part Status: | Active |
Amplifier Type: | CMOS |
Number of Circuits: | 2 |
Output Type: | -- |
Slew Rate: | 8 V/µs |
Gain Bandwidth Product: | 6MHz |
Current - Input Bias: | 1pA |
Voltage - Input Offset: | 6mV |
Current - Supply: | 750µA |
Voltage - Supply, Single/Dual (±): | 2.5 V ~ 5.5 V |
Operating Temperature: | -40°C ~ 105°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The READ2302GSP#GC0 amplifier is a type of linear amplifier used in many applications. It features high gain and good power efficiency, and is commonly used for instrumentation, operational amplifiers, buffers and other applications. This article will discuss the application field, working principle, and possible applications of this amplifier.
Application Field
Linear amplifiers, such as the READ2302GSP#GC0, are typically used in precision instrumentation, operational amplifiers (op-amps), buffer amplifiers, and other applications. These amplifiers are primarily used to amplify and transfer the signal to a higher voltage level, while maintaining the signal waveform. They are typically used in circuits where a large signal gain is necessary, and they are often used in cases where a low distortion waveform is desired. Additionally, they can be used in cases where low noise and power efficiency are necessary.
Working Principle
The principle behind the working of the READ2302GSP#GC0 amplifier is the transimpedance concept. This is a common approach for amplifying weak, low level signal and transferring the signal to a higher voltage level. The transimpedance concept involves a feedback element and an active device (normally an operational amplifier) that is used to provide signal gain and condition the signal waveform. The feedback element allows the signal gain to be adjusted relative to the input signal, and the active device provides the necessary gain to amplify the signal and also eliminates distortion from the signal waveform.
The READ2302GSP#GC0 amplifier features an integrated output stage, which offers higher performance and better power efficiency by eliminating the need for external components. This output stage is connected in the feedback loop to provide the necessary signal gain, and the active device is used to improve the signal waveform. The feedback component also helps to maintain the desired signal level and preserves the output power.
Possible Applications
The READ2302GSP#GC0 amplifier can be used in a variety of applications. It is most commonly used in precision instrumentation, operational amplifiers (op-amps), buffers and other applications that require a high signal gain. Additionally, it can be used in applications where low distortion and low noise are desired. For example, it can be used to amplify and narrow bandwidth signal in signal processing applications, or to directly drive heavy or high capacitive loads.
The READ2302GSP#GC0 amplifier can also be used in precision control applications. It is especially useful for applications where a high degree of control (i.e., a low signal gain) is necessary. The feedback component allows the signal gain to be adjusted, and the integrated output stage provides better power efficiency. Additionally, the low distortion and low noise performance of this amplifier make it suitable for a variety of control applications.
Finally, the READ2302GSP#GC0 amplifier is suitable for use in applications where energy efficiency is a priority. The amplifier is designed with a power consumption of only 1.5 W, which makes it well-suited for applications with limited power budgets. Additionally, the integrated output stage provides higher performance and better power efficiency compared to traditional amplifiers.
Conclusion
The READ2302GSP#GC0 amplifier is a type of linear amplifier designed for instrumentation, operational amplifiers (op-amps), buffers, and other applications. It features high gain and good power efficiency, and is suitable for applications where a large signal gain and low distortion is desired. Additionally, the integrated output stage provides higher performance and better power efficiency. It is also suitable for precision control applications, and its low power consumption makes it an ideal choice for applications where energy efficiency is a priority.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SPS-READER-GEVK | ON Semicondu... | 135.63 $ | 12 | IOT IDK SPS READER EVALUA... |
READ2302GSP#GC0 | Renesas Elec... | 0.25 $ | 1000 | IC OPAMP 8TSSOPCMOS Ampli... |
IR-1900-COUNTER-READOUT | TE Connectiv... | 219.95 $ | 1000 | BELT HEATER ACCESSORYBELT... |
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...