REC10-2405SZ/H2/M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are used in many electronic systems to convert a DC voltage from one level to another. The REC10-2405SZ/H2/M is a type of DC DC converter that is commonly used in industrial, commerical and military applications. It provides an efficient solution for converting between different DC voltages and offers protection against excess current and circuit overload. The REC10-2405SZ/H2/M is capable of rating 85 to 264VAC and offers a wide range of output voltage adjustments from 0 to 24V DC with a maximum output power of 10W.

The REC10-2405SZ/H2/M is based on a single stage buck topology and uses a higher frequency switching cycle to convert from one voltage to another. The basic operating principle of this type of converter is that power is transferred from a high voltage input voltage to a lower output voltage through the use of a transistor. The transistor acts as a pass element, allowing current to flow from the input to the output in an oscillatory manner when the transistor is in the on state. When the transistor is off, the input voltage is blocked and no current flows. This switching of the transistor is controlled by a feedback circuit, which monitors the output voltage and adjusts the switching frequency accordingly.

The REC10-2405SZ/H2/M is composed of several components, including an input source, an output stage circuit, and a control circuit for regulating the output voltage. The input consists of a voltage rectifier, an EMI filter, and a power rectifier. The rectifiers convert the input AC supply to DC and the filter removes any EMI noise that could potentially damage the circuit. The power rectifier then converts the DC voltage to its desired level.

The output stage consists of a power transistor, a current transformer, and a series of capacitors. The power transistor is a switching device that is controlled by the control circuit. The current transformer is used to measure the output current and the capacitors are for stabilizing the output voltage. The control circuit is comprised of a comparator, a timer, and a voltage regulator. The comparator compares the output voltage to the set value and the timer is used to adjust the frequency of the switching cycle. The voltage regulator adjusts the drive signal to the transistor to ensure the output voltage is maintained at the set value.

The REC10-2405SZ/H2/M is suitable for applications where high efficiency, small size, and cost-effectiveness are important considerations. It is commonly used in industrial, commercial and military environments. It is usually placed in an enclosed chassis or cabinet for protection and ease of mounting. Its applications include use in regulated DC power supplies, UPSs, solar systems, battery charging systems, and other low-voltage applications.

The REC10-2405SZ/H2/M is an efficient and reliable way to convert different DC voltages. Its simple design provides a cost-effective solution for power conversion. Its high switching frequency ensures noise free operation and its adjustable output ensures it is capable of providing the correct level of voltage to the load. It also provides protection against current overloads and short circuits. With its small size and low cost, the REC10-2405SZ/H2/M is an ideal choice for a variety of DC power conversion applications.

The specific data is subject to PDF, and the above content is for reference