REG102UA-5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear voltage regulators are widely used as power supply stabilizers, providing constant voltage and power to ready-made or homemade electronic equipment. The REG102UA-5 linear voltage regulator is a voltage regulator with low dropout (LDO) properties — its input and output voltages can be very close, but never the same.

The REG102UA-5 is a medium-power linear voltage regulator with a maximum output current of up to 150mA. Its output is adjustable from 1.2 to 28V, with an accuracy of ±2.0%. It is also capable of low quiescent current, low dropout voltage and low output noise. This makes it suitable for applications in hand-held equipment, industrial equipment, automotive systems, battery powered systems and other medium power applications.

The main component of REG102UA-5 is an op-amp. It is an in-amp or operand amplifier, which is designed to execute mathematical operations on all its inputs. The REG102UA-5 uses an amplifier to amplify the input voltage to a voltage directly proportional to the control voltage. The voltage control voltage is generated internally when a reference voltage is compared with the output voltage. It is then amplified by the amplifier and applied to the feedback pin of the regulator, where a current proportional to the difference between the control voltage and feedback voltage is generated.

The REG102UA-5 provides various protection features that protect the device from overvoltage, overcurrent and short circuit. It also has short-circuit protection and thermal overload protection. These features allow the device to be used in a variety of applications, ranging from consumer-grade consumer electronics to industrial equipment and automotive systems.

The REG102UA-5 is an ideal solution for applications that require high accuracy, low output noise and good stability. Its simple architecture and wide voltage range make it an ideal choice for low power systems. It can also be used in medium power applications with some modifications in order to achieve the desired output voltage.

The specific data is subject to PDF, and the above content is for reference