REM10-1215S/C Datasheet/PDFDC DC Converters
A DC-DC converter is a device that takes a direct current (DC) input and produces a different DC output voltage. The output voltage may be higher, lower, or of a different polarity than the input voltage, depending on the application. They have a wide range of applications including dimmer and motor control, sensors and solar photovoltaic systems. One of the most common types of DC-DC converter is the buck-boost converter. This type can provide both step-up (boost) and step-down (buck) voltage conversion.
REM10-1215S/C Application Field and Working Principle
The REM10-1215S/C is a high performance, wide input range, and intelligent DC-DC converter with output voltage adjustment(up to 15V) and output current up to 15A. It offers comprehensive protection functions including overvoltage, over current, and overload protection. It is suitable for applications in communication, computer, and industrial control.
The REM10-1215S/C has four operating modes: boost mode, buck mode, dual mode, and synchronous buck mode. In boost mode the input voltage is increased by 40-50% of the output voltage. In buck mode the input voltage is decreased by 40-50% of the output voltage. In dual mode the input voltage is adjusted based on the position of the voltage setting switches, allowing for higher or lower output voltage as needed. In synchronous buck mode the input voltage is switched to the output voltage.
The operation of the REM10-1215S/C is based on a pulse width modulation (PWM) control scheme. It uses a PWM signal to control the switching of power MOSFETS in order to regulate the output voltage. During operation, the PWM signal varies in frequency and duty cycle (ratio of the on and off time of the PWM signal) to control the amount of power delivered to the output. The frequency of the PWM signal can be set with a trim pot.
The REM10-1215S/C has comprehensive safety features. It has built-in overvoltage protection, over current protection, and output short circuit protection. It also has a temperature monitor that will shut down the converter if it becomes too hot. All of these features ensure that the REM10-1215S/C is safe to use in many applications.
The REM10-1215S/C is an excellent choice for applications that require adjustable output voltage, high efficiency, and comprehensive safety features. Its wide input range makes it suitable for many different voltage inputs. Its intelligent control system makes it a reliable choice for a variety of applications.